Fluke 87V Industrial Multimeter

Manufactured by:
FLUKE
Fluke

63dda813efa7448cc0617637c56f20724000b06b medium
Nuova Elva code
87V
Availability
Send request for quotation

Fluke 87V Industrial Multimeter delivers accurate frequency measurements on adjustable speed drives, captures intermittents as fast 250 µS. Learn More.

Features

  • Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter

  • When productivity is on the line and you need to solve problems fast, the Fluke 87V delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V industrial multimeter, allows you to gain productivity by taking the guesswork out of drive system troubleshooting even in loud, high energy, and high altitude locations.

  • Built-in thermometer allows temperature measurements without a separate thermometer

  • Peak Min/Max allows capture of intermittents as fast 250 µS

  • Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings

  • CAT III 1000V, CAT IV 600V safety rated

  • Designed and built in the U.S.A.

  • Lifetime warranty

  • Fluke builds the most trusted tools in the world and that means more than just the Fluke 87V. If you work with HVAC equipment, need a small meter for small spaces or work in the electrical installer's and repairman's world, check out the full family of Fluke digital multimeters.

  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument

  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks

  • Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models

  • True RMS AC voltage and current for accurate measurements on non linear signals

  • Selectable filter for accurate voltage and frequency measurements on motor drives

  • 0.05% DC accuracy

  • 6000 counts, 3-3/4 digits

  • 4-1/2 digit mode for precise measurements (20,000 counts)

  • Measure up to 1000 VAC and DC

  • Measure up to 10 A, 20 A for up to 30 seconds

  • Built in thermometer lets you carry one less tool (TC probe included)

  • Frequency to 200 kHz and % duty cycle

  • Resistance, continuity and diode test

  • 10,000 µF capacitance range for components and motor caps

  • Min/Max-Average recording with Min/Max Alert to capture variations automatically

  • Peak capture to record transients as fast as 250 µs

  • Relative mode to remove test lead interference from low ohms measurements

  • Auto and manual ranging for maximum flexibility

  • Touch Hold to capture stable readings avoiding noisy signals

  • Large display digits and two-level bright white backlight for increased visibility

  • Analog bargraph for fast changing or unstable signals

  • Input Alert provides audible warning against wrong use of input jacks

  • Improved selectable sleep mode for long battery life

  • Access door for fast battery changes without breaking the calibration seal

  • Classic" design with new removable holster with built in test lead and probe storage

  • Lifetime warranty

  • All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals

  • Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

  • Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency

  • Measure AC current with an optional current clamp accessory

  • Compare reading from the 87V with the display on the ASD

  • Special shielding blocks high frequency, high-energy noise generated by large drive systems

  • TL75 Test Leads

  • AC175 Alligator Clips

  • Holster

  • 9V Battery (Installed)

  • 80BK Temperature Probe

  • Fluke TLK 220

  • Fluke C100

  • Fluke C101

  • Fluke C1600

  • Fluke C25

  • Fluke C35

  • Fluke C550

  • Fluke C800

  • Fluke CAMO-C25

  • Fluke CXT80

  • Fluke H80M

  • Fluke TPAK

  • Fluke AC220

  • Fluke AC280

  • Fluke AC283

  • Fluke AC285

  • Fluke AC87

  • Fluke AC89

  • Fluke BP980

  • Fluke TLK225

  • Fluke i1010

  • Fluke i1010 Kit

  • Fluke i200

  • Fluke i2000 Flex

  • Fluke i200s

  • Fluke i400

  • Fluke i410

  • Fluke i410 Kit

  • Fluke FOM

  • Fluke 80K 40

  • Fluke 80K 6

  • Fluke-PV350

  • Fluke L200

  • Fluke L210

  • Fluke L215

  • Fluke MeterCleaner Wipes

  • Fluke 80AK A

  • Fluke 80PK 11

  • Fluke 80PK 24

  • Fluke 80PK 25

  • Fluke 80PK 26

  • Fluke 80PK 27

  • Fluke 80PK 8

  • Fluke H900

  • Fluke TL220

  • Fluke TL221

  • Fluke TL222

  • Fluke TL223

  • Fluke TL224

  • Fluke TL225

  • Fluke TL26A

  • Fluke TL40

  • Fluke TL71

  • Fluke TL75

  • Fluke TL76

  • Fluke TL81A

  • Fluke TL930

  • Fluke TL932

  • Fluke TL935

  • Fluke TL940

  • Fluke TL950

  • Fluke TL960

  • Fluke TL970

  • Fluke TLK220

  • Fluke 85RF

  • Fluke TL80A

  • Fluke TL910

  • Fluke TP1

  • Fluke TP2

  • Fluke TP220

  • Fluke TP4

  • Fluke TP74

  • Fluke TP80

  • Fluke TP912

  • Fluke TP920

  • Fluke 87V Ex

  • Fluke 87V/E Kit

  • Fluke 87V/E2 Kit

  • Fluke 87V/IMSK Kit

  • Fluke 83V

  • Fluke 87V/E2 Industrial Electrician Combo Kit

  • Fluke 87V/IMSK Industrial Multimeter Service Combo Kit

  • Fluke 83V Average Responding Industrial Multimeter

  • Fluke 87V/AEK Advanced Electronic Kit

  • Fluke TL175 TwistGuard Test Leads

  • Fluke i400 AC Current Clamp

  • Fluke i410 AC/DC Current Clamp

  • Fluke 289 True-RMS Industrial Logging Multimeter

  • Fluke 28 II Rugged Digital Multimeter

  • Fluke 113 Digital Multimeter

  • Fluke 114 Digital Multimeter

  • Fluke 116/62 MAX+ Technician’s Combo Kit

  • Fluke 117/323 Electricians Multimeter Combo Kit

  • Fluke CAMO-C25 Camouflage Carrying Case

  • Fluke 110 Plus Digital Multimeter

Specifications

Operating Temperature20 To 55 °C
Storage Temperature40 To 60 °C

Environmental Specifications

Operating Altitude2000 m
Humidity (without condensation)0% – 90% (0°C – 35°C) 0% – 70% (35°C – 55°C)
Storage temperature–40°C to + 60°C
Operating temperature–20°C to + 55°C

Safety Specifications

Agency approvalsUL, CSA, TÜV, VDE listed
Overvoltage categoryEN 61010–1 to 1000 V CAT III, 600V CAT IV

Docs


Request a quote