Fluke TL225 SureGrip
- Manufactured by:
- FLUKE
Stray voltage adapter test lead kit
Features
The solution is to make sure there is a lower impedance across the input terminals of the meter. However, this is not as easy as it seems since it is vital that the safety of the electrician is not compromised.
Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized. This is called stray or ghost voltages and is caused by the capacity between wires. Because of the very high impedance input of the meter, this stray voltage has nowhere to go which will lead to an incorrect reading on the meter.
It makes sure the meter has a low input impedance that eliminates stray voltages.
On energized wires, the meter will indicate the real voltage.
On non-energized circuits the meter will read close to zero (even if there are stray voltages).
It can be used with all modern meters with standard input spacing.
Rated CAT III 1000 V, CAT IV 600 V
One year warranty
Fluke SV225/10PAK
Fluke C75
112/322 KIT
Fluke 116/322 Kit
Fluke 116/323 Kit
Fluke 1503
Fluke 1507
Fluke 1577
Fluke 175
Fluke 177
Fluke 179
Fluke 233
Fluke 287
Fluke 289
Fluke 83V
Fluke 87V
Fluke 88V/A Kit
Fluke TL224
Fluke SV225
Specifications
Type | Stray Voltage Adapter Test Lead Kit |
---|---|
Technical Specifications | |
Nominal resistance | 3,000 Ω @ 25°C (77°F) |
Humidity | 90% at 0 to 35°C (32°F to 95°F)70% at 35 to 55°C (95°F to 131°F) |
Operation temperature | -20°C to +55°C (-40°F to 131°F) |
Altitude | 2,000 meters operating |