Contrast Sensor Type PD 60 CNK 18 BP T
- Manufactured by:
- CARLO GAVAZZI PANTEC
- Nuova Elva code
- PD60CNK18BPT
- Manufacturer code
- PD60CNK18BPT
- Availability
- Send request for quotation
The PD60CNK18BP.. is a fibre optic amplifier made specifically for plastic fibres to detect contrast. The sensor is microprocessor-based and features manual distance setup by keyboard. NO or NC (light or dark mode) output is selectable by wiring. The sensor output is built as a Push-pull output that performs both a NPN and a PNP output, which are fully protected against short-circuit, transients and wrong polarity. The sensor is built in a strong 13 x 30 x 60 mm polycarbonate housing for DIN-rail mounting.
Features
Range: 18 mm ±2 mm
Microprocessor controlled and EEPROM parameter storage
Operational voltage 10 - 30 V DC
Output 100 mA, NPN and PNP
Light or dark switching selectable
Cable
IP65 protection
cUL and CE approved
Manual contrast set-up
Specifications
| Certifications | CUL |
|---|---|
| Protection Rating | IP 65 |
| Weight | 24 g |
Specifications | |
| Housing W x H x D | 13 x 30 x 60 mm |
| Detection distance | 18 mm ±2 mm |
| Temperature drift | < 0,4%/°C |
| Rated operational volt. (UB ) | 10 to 30 VDC (ripple included) |
| Ripple (Urpp ) | ≤ 10% |
| No load supply current (Io) | 50 mA |
| Switching frequency | 20 kHz |
| Protection | Short-circuit, reverse pola- rity, transients |
| Light source | White LED |
| Spot diameter @18 mm | 1.5 mm (FPDK01SCC100) |
| Modulation frequency | 40 kHz |
| Power ON delay (tv) | ≤ 300 ms |
| Output function NPN and PNP | Available (Push-Pull output) |
| Vibration | 10 to 150 Hz, 0.5 mm/7.5 g (IEC60068-2-6) |
| Shock | 2 x 1 m & 100 x 0.5 m (IEC 60068-2-6, 60068-2-32) |
| Rated insulation voltage | 50 VAC (rms) |
| Housing Body material | Polycarbonate |
| Connection | PVC, black, 2 m, 4 x 0.25 mm2 |
| Weight | 24 g |
| Approvals | cUL |
| CE-marking | Yes |
Output Current | |
| Continuous (Ie) | 100 mA |
| Short-time (I) | 100 mA |
Voltage Drop (Ud ) | |
| IL = 100 mA | ≤ 2 VDC |
| IL = 10 mA | ≤ 1 VDC |
Ambient Light | |
| Incandescent light | 10’000 Lux |
| Sunlight | 20’000 Lux |
Response Time | |
| OFF-ON (tON) | ≤ 25 μs |
| ON-OFF (tOFF) | ≤ 25 μs |
Indication Function | |
| Insufficient contrast | Both green LED and red key flash for 2 s |
| Short-circuit output | Both green LED and red key flash continuously |
Environment | |
| Installation category | II (IEC 60664/60664A;60947-1) |
| Pollution degree | 3 (IEC 60664/60664A;60947-1) |
| Degree of protection | IP 65 (IEC 60529; 60947-1) |
Temperature | |
| Operating | 0°to +40°C (32°to +104°F) |
| Storage | -20°to +80°C (-4°to +176°F) |
