Distributed I/O device - AXL E PB DI16 M12 6P - 2701498
- Manufactured by:
- PHOENIX CONTACT
- Price (VAT excluded)
- € 458.90
- Nuova Elva code
- 2701498
- Manufacturer code
- 2701498
- Availability
- Send request for quotation
Axioline E, Digital input device, PROFIBUS DP, M12 fast connection technology, Digital inputs: 16, 24 V DC, connection method: 4-wire, Plastic housing, degree of protection: IP65/IP67
Features
Connection to PROFIBUS DP using M12connectors (B-coded)
Baud rate of up to 12 Mbaud (automatic baud rate detection)
Connection of digital sensors using M12connectors (A-coded)
Diagnostic and status indicators
Short-circuit and overload protection of the sensor supply
IP65/IP67 degree of protection
cULus Listed
PROFIBUS
UL Listed
cUL Listed
Specifications
| Depth | 30.5 mm |
|---|---|
| Height | 185 mm |
| Width | 60 mm |
Electrical isolation | |
| Test section | 24 V supply (communications power and sensor supply, digital inputs)/bus connection 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (communications power and sensor supply, digital inputs)/FE 500 V AC 50 Hz 1 min. |
| Test section | Bus connection / FE 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (actuator supply)/24 V supply (communications power and sensor supply, digital inputs) 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (actuator supply)/bus connection 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min. |
Standards and Regulations | |
| Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| Mechanical tests | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse |
| Mechanical tests | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 25; |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions | |
| Width | 60 mm |
| Height | 185 mm |
| Depth | 30.5 mm |
| Note on dimensions | The height is 212 mm including fixing clips. |
| Drill hole spacing | 198.5 mm |
Interfaces | |
| Designation | PROFIBUS DP |
| No. of channels | 2 |
| Connection method | M12 fast connection technology |
| Note on the connection method | B-coded |
| Designation connection point | Copper cable |
| Transmission speed | 9.6 kbps - 12 Mbps (Automatic baud rate detection) |
| Transmission physics | PROFIBUS-DP-compliant copper cable |
| Address area assignment | 1 - 126, adjustable |
| Number of positions | 5 |
Supply | |
| Designation | Module electronics and sensors (US) |
| Number of positions | 4 |
| Supply voltage | 24 V DC |
| Current consumption | typ. 165 mA ±15 % (at 24 V DC) |
| Designation | Actuators (UA) for additional devices |
| Connection method | M12 connector (T-coded) |
| Supply voltage range | 18 V DC - 31.2 V DC (including all tolerances, including ripple) |
| Current consumption | typ. 3 mA ±15 % (at 24 V DC) |
Digital inputs | |
| Input name | Digital inputs |
| Description of the input | EN 61131-2 types 1 and 3 |
| Connection method | M12 connector, double occupancy |
| Connection technology | 4-wire |
| Number of inputs | 16 |
| Protective circuit | Overload protection, short-circuit protection of sensor supply |
| Nominal input voltage UIN | 24 V DC |
| Nominal input current at UIN | typ. 3 mA |
| Input filter time | < 1000 µs |
| Cable length | max. 30 m (To the sensor) |
| Input voltage range "0" signal | 0 V - 5 V DC |
| Input voltage range "1" signal | 11 V DC - 30 V DC |
Ambient conditions | |
| Permissible humidity (operation) | 5 % - 95 % |
| Permissible humidity (storage/transport) | 5 % - 95 % |
| Air pressure (operation) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
| Degree of protection | IP65/IP67 |
| Ambient temperature (operation) | -25 °C - 60 °C |
| Ambient temperature (storage/transport) | -25 °C - 85 °C |
System limits of the bus coupler | |
| Designation | PROFIBUS DP |
| Equipment type | PROFIBUS slave |
| System-specific protocols | PROFIBUS protocols DP V1 |
Note | |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
