Distributed I/O device - FLS PB M12 DIO 4/4 M12-2A - 2736107
- Manufactured by:
- PHOENIX CONTACT
The stand-alone device for PROFIBUS has 4 digital inputs and 4 digital outputs each with a load capacity of 2 A. The M12 connection is established using fast connection technology. The 24 V DC supply is protected against short circuit and overload.
Features
Flexible power supply concept
Diagnostic and status indicators
SPEEDCON fast locking system
Short-circuit and overload protection
Consistent connection via M12 connectors
Directly accessible address encoding switch
cULus Recognized
PROFIBUS
EAC
UL Recognized
cUL Recognized
Specifications
Depth | 49.3 mm |
---|---|
Height | 178 mm |
Width | 60 mm |
Electrical isolation | |
Test section | 24 V supply (bus logics) / Bus connection 500 V AC 50 Hz 1 min. |
Test section | 24 V supply (bus logics) / FE 500 V AC 50 Hz 1 min. |
Test section | 24 V supply (bus logics) / Digital inputs (sensor supply / I/O) 500 V AC 50 Hz 1 min. |
Test section | 24 V supply (bus logics) / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min. |
Test section | Bus connection / FE 500 V AC 50 Hz 1 min. |
Test section | Bus connection / Digital inputs (sensor supply) 500 V AC 50 Hz 1 min. |
Test section | Bus connection / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min. |
Test section | FE / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min. |
Test section | FE / Digital inputs (sensor supply) 500 V AC 50 Hz 1 min. |
Test section | Digital outputs (actuator supply) / Digital outputs (actuator supply) 500 V AC 50 Hz 1 min. |
Environmental Product Compliance | |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions | |
Width | 60 mm |
Height | 178 mm |
Depth | 49.3 mm |
Drill hole spacing | 168 mm |
Digital inputs | |
Input name | Digital inputs |
Description of the input | IEC 61131-2 type 1 |
Connection method | M12 connector |
Connection technology | 2, 3, 4-wire |
Number of inputs | 4 |
Protective circuit | Reverse polarity protection |
Nominal input voltage UIN | 24 V DC |
Filter time | 3 ms |
Input voltage | 24 V DC |
Input voltage range "0" signal | -30 V DC - 5 V DC |
Input voltage range "1" signal | 13 V DC - 30 V DC |
Interfaces | |
Designation | PROFIBUS DP |
Connection method | 2x M12 connectors, B-coded |
Designation connection point | Copper cable |
Transmission speed | 9.6 kbps - 12 Mbps (Automatic baud rate detection) |
Transmission physics | PROFIBUS-DP-compliant copper cable |
Address area assignment | 1 - 99, can be set |
Number of positions | 5 |
Digital outputs | |
Output name | Digital outputs |
Connection method | M12 connector |
Connection technology | 2, 3-wire |
Number of outputs | 4 |
Protective circuit | Short-circuit protection |
Output voltage | 24 V DC |
Maximum output current per channel | 2 A |
Ambient conditions | |
Air pressure (operation) | 80 kPa - 106 kPa (up to 2000 m above sea level) |
Air pressure (storage/transport) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP65/IP67 |
Ambient temperature (operation) | -25 °C - 60 °C |
Ambient temperature (storage/transport) | -25 °C - 85 °C |
Permissible humidity (storage/transport) | 95 % |
Fieldline potentials | |
Voltage supply UL | 24 V DC |
Power supply at UL | max. 4 A |
Current consumption from UL | typ. 40 mA |
Current consumption from UL | max. 100 mA |
Voltage supply US | 24 V DC |
Power supply at US | max. 4 A |
Current consumption from US | typ. 5 mA (plus sensor current) |
Current consumption from US | max. 700 mA |
Voltage supply UA11 | 24 V DC |
Power supply at UA11 | max. 4 A |
Current consumption at UA11 | typ. 6 mA (plus actuator current) |
Current consumption at UA11 | max. 4 A |
Voltage supply UA12 | 24 V DC |
Power supply at UA12 | max. 4 A |
Current consumption at UA12 | typ. 6 mA (plus actuator current) |
Current consumption at UA12 | max. 4 A |
Power supply for module electronics | |
Connection method | M12 connector, (A-coded) |
Designation | UL |
Supply voltage | 24 V DC |
Supply voltage range | 18 V DC - 30 V DC (including ripple) |
Standards and Regulations | |
Connection in acc. with standard | CUL |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Note | |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |