Relay Module - PLC-RPT- 24DC/21 - 2900299
- Manufactured by:
- PHOENIX CONTACT
- Price (VAT excluded)
- € 12.92
- Nuova Elva code
- 2900299
- Manufacturer code
- 2900299
- Availability
- Send request for quotation
PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 24 V DC
Features
Slim design
Efficient connection to system cabling using V8 adapter
RT III sealed relay
Safe isolation according to DIN EN 50178 between coil and contact
Functional plug-in bridges
Integrated input circuit and interference suppression circuit
cULus Listed
RC FRT
cULus Recognized
EAC
DNV GL
UL Listed
cUL Listed
UL Recognized
cUL Recognized
Specifications
| Depth | 94 mm |
|---|---|
| Height | 80 mm |
| Strip Length | 8 mm |
| Width | 6.2 mm |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Note | |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
| Type of note | Notes on operation |
| Note | Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500.... |
Dimensions | |
| Width | 6.2 mm |
| Height | 80 mm |
| Depth | 94 mm |
Contact side | |
| Contact type | 1 PDT |
| Type of switch contact | Single contact |
| Contact material | AgSnO |
| Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage | 5 V (at 100 mA) |
| Min. switching current | 10 mA (at 12 V) |
| Maximum inrush current | 10 A (4 s) |
| Limiting continuous current | 6 A |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 20 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 18 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 23 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 40 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
| Switching capacity | 2 A (at 24 V, DC13) |
| Switching capacity | 0.2 A (at 110 V, DC13) |
| Switching capacity | 0.1 A (at 220 V, DC13) |
| Switching capacity | 3 A (at 24 V, AC15) |
| Switching capacity | 3 A (at 120 V, AC15) |
| Switching capacity | 3 A (at 230 V, AC15) |
Coil side | |
| Nominal input voltage UN | 24 V DC |
| Typical input current at UN | 9 mA |
| Typical response time | 5 ms |
| Typical release time | 8 ms |
| Protective circuit | Reverse polarity protection Polarity protection diode |
| Protective circuit | Free-wheeling diode Damping diode |
| Operating voltage display | Yellow LED |
| Power dissipation for nominal condition | 0.22 W |
Connection data | |
| Connection name | Coil side |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² - 2.5 mm² (Single ferrule) |
| Conductor cross section flexible | 2x 0.5 mm² - 1 mm² (TWIN ferrule) |
| Conductor cross section AWG | 26 - 14 |
Connection data 2 | |
| Connection name | Contact side |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² - 2.5 mm² (Single ferrule) |
| Conductor cross section flexible | 2x 0.5 mm² - 1 mm² (TWIN ferrule) |
| Conductor cross section AWG | 26 - 14 |
Standards and Regulations | |
| Connection in acc. with standard | CUL |
| Designation | Standards/regulations |
| Standards/regulations | IEC 60664 |
| Standards/regulations | IEC 60664A |
| Standards/regulations | DIN VDE 0110 |
| Standards/regulations | DIN EN 50178/VDE 0160 (in relevant parts) |
| Standards/regulations | DIN EN 50178/VDE 0160 |
| Standards/regulations | IEC 60255/DIN VDE 0435 (in relevant parts) |
| Pollution degree | 3 |
| Overvoltage category | III |
Ambient conditions | |
| Degree of protection | IP20 (Relay base) |
| Ambient temperature (operation) | -40 °C - 60 °C |
| Ambient temperature (storage/transport) | -40 °C - 85 °C |
| Degree of protection | RT III (Relay) |
