RSS 36-I2-D-ST
- Manufactured by:
- SCHMERSAL
- Nuova Elva code
- 101216956
- Availability
- Send request for quotation
Features
Repeated individual coding with RFID technology
Coding level "High" according to ISO 14119
1 x connector socket M12, 8-pole
Actuation from side
Thermoplastic enclosure
RFID-technology for needs-based protection against tampering
Misaligned actuation possible
27 mm x 108.2 mm x 35 mm
High repeat accuracy of the switching points
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Teaching of the individual coding of a RST actuator through a simple routine during start-up (as -I1). A protected coding process enables teaching a new actuator in case of maintenance.
Specifications
| Ambient Temperature | -25 °C |
|---|---|
| Certifications | CULus |
| Enclosure Material | Glass-fibre Reinforced Thermoplastic |
| Standard | EN 62061 |
| Weight | 80 g |
Approval - Standards | |
| Certificates | TÜV | cULus | ECOLAB | EAC | FCC | IC |
General data | |
| Standards | IEC 60947-5-3 |
| general information | Individual coding, multiple teaching |
| Time to readiness, maximum | 2,000 ms |
| Reaction time, maximum | 100 ms |
| Duration of risk, maximum | 200 ms |
| Coding level according to ISO 14119 | High |
| Active principle | RFID |
| Housing construction form | Block |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Active area | Glass-fibre, reinforced thermoplastic |
| Gross weight | 80 g |
General data - Features | |
| Diagnostic output | Yes |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Safety functions | Yes |
| Cascadable | Yes |
| Integral System Diagnostics, status | Yes |
| Number of LEDs | 3 |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of fail-safe digital outputs | 2 |
Safety appraisal | |
| Standards | EN ISO 13849-1 | IEC 60947-5-3 | EN 62061 | IEC 61508 |
| Performance level, up to | e |
| Control category to EN13849 | 4 |
| PFH-value | 2.70 x 10⁻¹⁰ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission Time | 20 Year(s) |
Mechanical data | |
| Actuating panels | lateral |
| Active area | lateral |
| Hysteresis (Switch distance), maximum | 2 mm |
| Repeat accuracy R R | 0.5 mm |
| Note (Repeat accuracy | Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance between two sensor systems 100 mm. |
| Mounting | A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used. |
Mechanical data - Switching distances according IEC 60947-5-3 | |
| Switch distance | 12 mm |
| Ensured switch distance "ON" S | 10 mm |
| Ensured switch distance "OFF" S | 20 mm |
Mechanical data - Connection technique | |
| Terminal Connector | Connector M12, 8-pole |
| Note | The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current |
Mechanical data - Dimensions | |
| Length of sensor | 22 mm |
| Width of sensor | 106.3 mm |
| Height of sensor | 25 mm |
Ambient conditions | |
| Degree of protection | IP65 to EN 60529 | IP67 to EN 60529 | IP69 to EN 60529 |
| Ambient temperature, minimum | -25 °C |
| Protection rating | III |
| Ambient temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Storage and transport temperature, maximum | +85 °C |
| Material temperature resistance of the cable (in motion), minimum | -10 °C |
| Material temperature resistance of the cable (at rest), minimum | -30 °C |
| Material temperature resistance (long-term), maximum | +105 °C |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
Ambient conditions - Insulation value | |
| Rated insulation voltage U | 32 VDC |
| Rated impulse withstand voltage U | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution to VDE 0100 | 3 |
Electrical data | |
| Voltage type | DC (direct current) |
| No-load supply current I | 100 mA |
| Rated operating voltage | 24 VDC −15 % / +10 % |
| Rated operating voltage, minimum | 20.4 VDC |
| Rated operating voltage, maximum | 26.4 VDC |
| Operating current | 600 mA |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| Switching frequency, approx. | 1 Hz |
Electrical data - Fail-safe digital outputs | |
| Rated operating current (safety outputs) | 250 mA |
| Output current, (fail-safe output), maximum | 0.25 A |
| Versions | p-type |
| Voltage drop U | 1 V |
| Current leakage I | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.25 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.25 A |
Electrical data - Diagnostic output | |
| Versions | p-type |
| Voltage drop U | 2 V |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.05 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.05 A |
Electrical data - Electromagnetic compatibility (EMC) | |
| Interfering radiation | IEC 61000-6-4 |
| EMC rating | IEC 60947-3 |
Status indication | |
| Note (LED switching conditions display) | LED yellow: Operating condition | LED green: Supply voltage | LED red: Fault |
Pin assignment | |
| PIN 1 | A1 Ue Brown |
| PIN 2 | X1 Safety input 1 White |
| PIN 3 | A2 GND Blue |
| PIN 4 | Y1 Safety output 1 Black |
| PIN 5 | OUT Diagnostic output OUT Grey |
| PIN 6 | X2 Safety input 2 violet |
| PIN 7 | Y2 Safety output 2 red |
| PIN 8 | IN without function Pink |
Scope of delivery | |
| Included in delivery | Actuators must be ordered separately. |
Accessory | |
| Recommendation (actuator) | RST 36-1 | RST 36-1-R |
| Recommended safety switchgear | PROTECT PSC1 | SRB-E-301ST | SRB-E-201LC |
