SITOP PSU8200 24 V/40 A
- Manufactured by:
- SIEMENS
- Nuova Elva code
- 6EP14373BA10
- Manufacturer code
- 6EP1437-3BA10
- Availability
- Send request for quotation
SITOP PSU8200 24 V/40 A STABILIZED POWER SUPPLY INPUT: 400-500 V 3 AC OUTPUT: 24 V DC/40 A
Specifications
| Weight | 3.4 kg |
|---|---|
Specifications | |
| Adjustable output voltage Full-scale value [V] | 28.8 |
| Behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| Short-term overload current at short-circuit during operation typical [A] | 120 |
| Standard for emitted interference | EN 55022 Class B |
| Standard for interference immunity | EN 61000-6-2 |
| Standard for mains harmonics limitation | EN 61000-3-2 |
| Supplied active power typical [W] | 960 |
| Supply voltage at 50 Hz rated value [V] | 400 |
| Supply voltage at 60 Hz rated value [V] | 500 |
| Supply voltage at AC Full-scale value [V] | 575 |
| Supply voltage at AC initial value [V] | 320 |
| Supply voltage at AC maximum rated value [V] | 500 |
| Buffering time at rated output current in the event of power failure minimum [ms] | 15 |
| Supply voltage at AC minimum rated value [V] | 400 |
| Type of certification CB-certificate | yes |
| Type of current supply | 24 V/40 A |
| Type of electrical connection | screw-type terminals |
| Type of electrical connection at input | L1, L2, L3, PE: 1 screw terminal each for 0.2 ... 4 mm² single-core/finely stranded |
| Type of electrical connection at output | =+, -: 2 screw terminals each for 0.33 ... 10 mm² |
| Type of electrical connection for auxiliary contacts | 13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm² |
| Type of output voltage setting | via potentiometer |
| Type of signal at output | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK" |
| Type of the power supply network | 3-phase AC |
| Certificate of suitability as approval for USA | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| Voltage curve at input | AC |
| Voltage curve at output | Controlled, isolated DC voltage |
| Voltage increase time of the output voltage maximum [ms] | 500 |
| Voltage peak maximum [mV] | 200 |
| Width of the enclosure [mm] | 150 |
| Certificate of suitability ATEX | yes |
| Certificate of suitability cCSAus, Class 1, Division 2 | yes |
| Certificate of suitability CE marking | yes |
| Certificate of suitability CSA-approval | yes |
| Certificate of suitability FM registration | no |
| Certificate of suitability IECEx | yes |
| Certificate of suitability NEC Class 2 | no |
| Adjustable output voltage Full-scale value Note | max. 960 W |
| Certificate of suitability relating to ATEX | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4 |
| Certificate of suitability Shipbuilding approval | yes |
| Certificate of suitability UL approval | yes |
| Constant overload current on short-circuiting during the start-up typical [A] | 44 |
| Current limitation of inrush current at 25 °C maximum [A] | 56 |
| Depth of the enclosure [mm] | 150 |
| Design of input wide range input | yes |
| Design of short-circuit protection | Alternatively, constant current characteristic approx. 44 A or latching shutdown |
| Design of the overvoltage protection | < 35 V |
| Display version for normal operation | Green LED for 24 V OK |
| Adjustable output voltage initial value [V] | 24 |
| Display version for overload and short circuit | LED yellow for "overload", LED red for "latching shutdown" |
| Documentation selection list | yes |
| Duration of overloading capability for excess current at short-circuit during operation [ms] | 25 |
| Efficiency in percent [%] | 92 |
| Electrical accessories | Buffer module |
| Enduring short circuit current RMS value typical [A] | 44 |
| Environmental category acc. to IEC 60721 | Climate class 3K3, no condensation |
| Equipment marking acc. to DIN EN 81346-2 | T |
| Fuse protection type In the feeder | Required: 3-pole connected miniature circuit breaker 10 ... 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) |
| Galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| Ambient temperature during operation Full-scale value [°C] | 70 |
| Galvanic isolation between entrance and outlet | yes |
| Height of the enclosure [mm] | 125 |
| I2t value maximum [A2.s] | 2.24 |
| Input current at rated input voltage 400 V Rated value [A] | 2.6 |
| Input current at rated input voltage 500 V Rated value [A] | 2.1 |
| Installation width [mm] | 150 |
| Leakage current maximum [mA] | 3.5 |
| Line frequency 1 Rated value [Hz] | 50 |
| Line frequency 2 Rated value [Hz] | 60 |
| Line frequency Full-scale value [Hz] | 63 |
| Ambient temperature during operation initial value [°C] | -25 |
| Line frequency initial value [Hz] | 47 |
| Marine classification association American Bureau of Shipping Europe Ltd. (ABS) | yes |
| Marine classification association Germanische Lloyd (GL) | yes |
| Mechanical accessories | Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20 |
| Mounting height [mm] | 225 |
| Mounting type | Snaps onto DIN rail EN 60715 35x15 |
| Mounting type S7 rail mounting | no |
| Mounting type Standard rail mounting | yes |
| Mounting type wall mounting | no |
| MTBF at 40 °C [h] | 885739 |
| Ambient temperature during storage Full-scale value [°C] | 85 |
| Net weight [kg] | 3.4 |
| Number of parallel-switched resources for increasing the power | 2 |
| Operating condition of the mains buffering | at Vin = 400 V |
| Operating resource protection class | Class I |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| Output current Rated range Full-scale value [A] | 40 |
| Output current Rated range Full-scale value Note | =+60 ... +70 °C: Derating 3.75%/K |
| Output current Rated range initial value [A] | 0 |
| Output current Rated value [A] | 40 |
| Output voltage at DC Rated value [V] | 24 |
| Ambient temperature during storage initial value [°C] | -40 |
| Output voltage at output 1 at DC Full-scale value [V] | 24 |
| Output voltage at output 1 at DC initial value [V] | 24 |
| Overcurrent overload capability in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| Phase number | 3 |
| Power loss [W] at rated output current at rated output current typical [W] | 83 |
| product brand name | SITOP PSU8200 |
| Product designation | Power supply SITOP modular |
| Product feature bridging of equipments | yes |
| Product feature bridging of equipments Note | switchable characteristic |
| Product feature device in control circuit | yes |
| Ambient temperature during transport Full-scale value [°C] | 85 |
| Product feature of the enclosure housing for side-by-side mounting | yes |
| Product function Output voltage adjustable | yes |
| Product function Output voltage controlled | yes |
| Product function Output voltage stabilized | yes |
| Property of the output Short-circuit proof | yes |
| Protection class IP | IP20 |
| Relative control precision of the output voltage load step of resistive load 50/100/50 % typical [%] | 3 |
| Relative control precision of the output voltage On slow fluctuation of input voltage [%] | 0.1 |
| Relative control precision of the output voltage On slow fluctuation of ohm loading [%] | 0.2 |
| Relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical [%] | 1 |
| Ambient temperature during transport initial value [°C] | -40 |
| Relative overall tolerance of the voltage [%] | 3 |
| Required spacing bottom [mm] | 50 |
| Required spacing left [mm] | 0 |
| Required spacing right [mm] | 0 |
| Required spacing top [mm] | 50 |
| Residual ripple maximum [mV] | 100 |
| Response delay maximum [s] | 2.5 |
| Response value current limitation typical [A] | 44 |
| Setting time maximum [ms] | 10 |
| Shipbuilding approval | GL, ABS |
Delivery Information | |
| Export Control Regulations | AL : N / ECCN : N |
| Delivery Time | 1 Day/Days |
| Net Weight (lb) | 7,496 lb |
| Product Dimensions (W x L x H) | Not available |
| Packaging Dimension | 7,283 x 7,283 x 5,906 |
| Package size unit of measure | in |
| Quantity Unit | 1 Piece |
| Packaging Quantity | 1 |
Additional Product Information | |
| EAN | 4025515152538 |
| UPC | 40892549577 |
| Commodity Code | 85044090 |
| LKZ_FDB/ CatalogID | KT10-PE |
| Product Group | 4213 |
| Country of origin | Romania |
| RoHS Compliance | Since: 03/10/2009 |
| Returnable | Yes |
| Obligation Category for taking back electrical and electronic equipment after use | No obligation to take back electrical and electronic equipment after use |
