| Prospective Line Isc | 50 kA |
|---|
| Communication Port Protocol | Ethernet || Modbus TCP || Modbus serial |
|---|
| Product Specific Application | process and utilities |
|---|
| Safety Function | STO (safe torque off) SIL 3 |
|---|
| Maximum Horse Power Rating | 50 hp normal duty || 40 hp heavy duty |
|---|
| Supply Frequency | 50...60 Hz - 5...5 % |
|---|
| Option Card | slot A communication module, Profibus DP V1 || slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A communication module, CANopen screw terminals || slot A/slot B digital and analog I/O extension module || slot A/slot B output relay extension module || slot A communication module, Ethernet IP/Modbus TCP/MD-Link || communication module, BACnet MS/TP || communication module, Ethernet Powerlink |
|---|
| Range Of Product | Altivar Process ATV600 |
|---|
| Speed Drive Output Frequency | 0.1-500 Hz |
|---|
| Ip Degree Of Protection | IP20IEC 61800-5-1 || IP00 at bottom terminals)IEC 60529 |
|---|
| Motor Power Kw | 37 kW normal duty) || 30 kW heavy duty) |
|---|
| Product Destination | asynchronous motors || synchronous motors |
|---|
| [Us] Rated Supply Voltage | 380...480 V |
|---|
| Maximum Transient Current | 82 A 60 s normal duty) || 92.3 A 60 s heavy duty) |
|---|
| [Us] Rated Supply Voltage | 380...480 V - 15...10 % |
|---|
| Discrete Input Logic | 16 preset speeds |
|---|
| Type Of Cooling | forced convection |
|---|
| Continuous Output Current | 74.5 A 4 kHz normal duty || 61.5 A 4 kHz heavy duty |
|---|
| Nominal Switching Frequency | 4 kHz |
|---|
| Device Short Name | ATV630 |
|---|
| Synchronous Motor Control Profile | permanent magnet motor || synchronous reluctance motor |
|---|
| Line Current | 66.2 A 380 V normal duty) || 57.3 A 480 V normal duty) || 54.8 A 380 V heavy duty) || 48.3 A 480 V heavy duty) |
|---|
| Emc Filter | integrated 10 m EN/IEC 61800-3 category C2 || integrated 50 m EN/IEC 61800-3 category C3 || with EMC plate option |
|---|
| Asynchronous Motor Control Profile | variable torque standard || constant torque standard || optimized torque mode |
|---|
| Variant | standard version |
|---|
| Product Or Component Type | variable speed drive |
|---|
| Apparent Power | 47.6 kVA 480 V normal duty) || 40.2 kVA 480 V heavy duty) |
|---|
| Switching Frequency | 2...12 kHz adjustable || 4...12 kHz with derating factor |
|---|
| Discrete Input Logic | positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V |
|---|
| Relay Output Type | configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 100000 cycles || configurable relay logic R3 sequence relay NO 100000 cycles |
|---|
| Frequency Resolution | display unit 0.1 Hz || analog input 0.012/50 Hz |
|---|
| Analogue Input Number | 3 |
|---|
| Motor Slip Compensation | not available in permanent magnet motor law || can be suppressed || adjustable || automatic whatever the load |
|---|
| Discrete Output Number | 0 |
|---|
| Method Of Access | slave Modbus TCP |
|---|
| Discrete Input Number | 8 |
|---|
| Local Signalling | for local diagnostic 3 LEDs || for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) |
|---|
| Linearity Error | AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AO1, AO2 +/- 0.2 % analog output |
|---|
| Number Of Addresses | 1-247 Modbus serial |
|---|
| Analogue Output Type | software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA |
|---|
| Width | 210 mm |
|---|
| Transmission Rate | 10, 100 Mbits || 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps |
|---|
| Depth | 262 mm |
|---|
| Analogue Input Type | AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits |
|---|
| Discrete And Process Manufacturing | building - HVAC compressor centrifugal || food and beverage processing other application || mining mineral and metal fan || mining mineral and metal pump || oil and gas fan || water and waste water other application || building - HVAC screw compressor || food and beverage processing pump || food and beverage processing fan || food and beverage processing atomization || oil and gas electro submersible pump (ESP) || oil and gas water injection pump || oil and gas jet fuel pump || oil and gas compressor for refinery || water and waste water centrifuge pump || water and waste water positive displacement pump || water and waste water electro submersible pump (ESP) || water and waste water screw pump || water and waste water lobe compressor || water and waste water screw compressor || water and waste water compressor centrifugal || water and waste water fan || water and waste water conveyor || water and waste water mixer |
|---|
| Sampling Duration | 2 ms +/- 0.5 ms DI1...DI4) - discrete input || 5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output |
|---|
| Electrical Connection | control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 35...50 mm² AWG 3...AWG 1 || motor screw terminal 35...50 mm² AWG 3...AWG 1 |
|---|
| Maximum Output Frequency | 500 kHz |
|---|
| Height | 597 mm |
|---|
| Acceleration And Deceleration Ramps | linear adjustable separately from 0.01...9999 s |
|---|
| Discrete Output Type | relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V DC 5000 mA |
|---|
| Transmission Frame | RTU |
|---|
| Relay Output Number | 3 |
|---|
| Data Format | 8 bits, configurable odd, even or no parity |
|---|
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output |
|---|
| Connector Type | RJ45 on the remote graphic terminal)Ethernet/Modbus TCP || RJ45 on the remote graphic terminal)Modbus serial |
|---|
| Input Compatibility | DI1...DI6 discrete input level 1 PLC EN/IEC 61131-2 || DI5, DI6 discrete input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC EN/IEC 61131-2 |
|---|
| Permissible Temporary Current Boost | 1.1 x In 60 s normal duty) || 1.5 x In 60 s heavy duty) |
|---|
| Mounting Mode | cabinet mount |
|---|
| Analogue Output Number | 2 |
|---|
| Physical Interface | Ethernet || 2-wire RS 485 |
|---|
| Maximum Switching Current | relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC || relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC |
|---|
| Minimum Switching Current | relay output R1, R2, R3 5 mA 24 V DC |
|---|
| Refresh Time | relay output R1, R2, R3)5 ms +/- 0.5 ms) |
|---|
| Enclosure Mounting | with heat sink |
|---|
| Isolation | between power and control terminals |
|---|
| Output Voltage | <= power supply voltage |
|---|
| Quantity Per Set | 1 |
|---|
| Braking To Standstill | by DC injection |
|---|
| Discrete Input Type | DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) |
|---|
| Protection Type | thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || motor phase break drive || overvoltages on the DC bus drive || line supply overvoltage drive || line supply undervoltage drive || line supply phase loss drive || overspeed drive || break on the control circuit drive |
|---|
| Supply | external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection |
|---|
| Exchange Mode | half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
|---|
| Power Range | 30-50 kW 380-440 V 3 phase || 30-50 kW 480-500 V 3 phase |
|---|
| Phase | 3 phase |
|---|
| Net Weight | 26 kg |
|---|
| Type Of Polarization | no impedance |
|---|
| Product Certifications | DNV-GL || TÜV || ATEX INERIS || CSA || UL || ATEX zone 2/22 |
|---|
| Overvoltage Category | III |
|---|
| Standards | UL 508C || EN/IEC 61800-3 || environment 1 category C2 EN/IEC 61800-3 || environment 2 category C3 EN/IEC 61800-3 || EN/IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1 |
|---|
| Pollution Degree | 2 |
|---|
| Electromagnetic Compatibility | electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency immunity test level 3 IEC 61000-4-6 |
|---|
| Ambient Air Temperature For Operation | -15-50 °C without derating) || 50-60 °C with derating factor) |
|---|
| Volume Of Cooling Air | 240 m3/h |
|---|
| Marking | CE |
|---|
| Pollution Degree | 2 EN/IEC 61800-5-1 |
|---|
| Noise Level | 63.5 dB |
|---|
| Ambient Air Temperature For Storage | -40-70 °C |
|---|
| Power Dissipation In W | natural convection 106 W 380 V 4 kHz || forced convection 796 W 380 V 4 kHz |
|---|
| Relative Humidity | 5-95 % without condensation IEC 60068-2-3 |
|---|
| Assembly Style | with heat sink |
|---|
| Operating Position | vertical +/- 10 degree |
|---|
| Maximum Thdi | <48 % from 80...100 % of load IEC 61000-3-12 |
|---|
| Standards | UL 508C || EN/IEC 61800-3 || EN/IEC 61800-3 environment 1 category C2 || EN/IEC 61800-3 environment 2 category C3 || EN/IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1 |
|---|
| Insulation Resistance | > 1 MOhm 500 V DC for 1 minute to earth |
|---|
| Shock Resistance | 15 gn 11 ms IEC 60068-2-27 |
|---|
| Vibration Resistance | 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6 |
|---|
| Noise Level | 63.5 dB 86/188/EEC |
|---|
| Regulation Loop | adjustable PID regulator |
|---|
| Operating Altitude | <= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m |
|---|
