standard analog input kit STB - 4..20 mA - 4 I - 15 bits + sign

Manufactured by:
Schneider Electric
Schneider electric

D5d00b4d668b724994088b2d7390791d4f14c6f9 medium
Price (VAT excluded)
€ 529.08
Nuova Elva code
STBACI8320K
Manufacturer code
STBACI8320K
Availability
Send request for quotation

This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 4 analogue inputs (current 0mA to 20mA, 4mA to 20mA) with 15bit plus sign resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 95mA at 5V DC for logic bus. It supports hot swap fallback, requires standard type network interface module (NIM). It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 18.4mm (height). It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA2000 and power distribution module STBPDT3100/3105. The kit includes STBACI8320 module, STBXBA2000 base, STBXTS1100, 6-terminal screw type connector and STBXTS2100, 6-terminal spring clamp connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network.

Specifications

CertificationsATEX Cat 3G
Current95 mA
Depth70 mm
Height18.4 mm
Impedance250 Ω
Storage Temperature-40-85 °C Without Derating
Warranty Length18 months
Width128.3 mm

Specifications

Range Of ProductModicon STB distributed I/O solution
Type Of Filtersingle low pass input filter 985 Hz
Product Or Component Typestandard analog input kit
Analogue Input Number4
Communication Port ProtocolHart protocol tolerance
Analogue Input Resolution15 bits + sign
Kit CompositionSTBACI8320 module || STBXBA2000 base || STBXTS1100, 6-terminal screw type connector || STBXTS2100, 6-terminal spring clamp connector
Analogue Input Typecurrent 0...20 mA || current 4...20 mA

Contractual warranty

Warranty18 months

Complementary

Insulation Between Channels And Logic Bus1780 V for 1 minute
Supplypower distribution module
Data FormatEN 61131-2 || IEC 61131-2
Current Consumption95 mA 5 V DC logic bus
MarkingCE
Fallback Statusstate 0 basic NIMs || user configurable standard NIMs
Temperature Drift+/-0.005 %/°C
Addressing Requirement8 input words
Absolute Accuracy Error+/- 0.4 % of full scale 25 °C
Absolute Maximum Input25 mA/50 V DC
Protection Typeshort-circuit protection
Cold Swappingyes
Update Time80 ms
Width128.3 mm
Overvoltage CategoryII
Depth70 mm
Product Compatibilitypower distribution module STBPDT3100/3105 || mounting base STBXBA2000
[Us] Rated Supply Voltage24 V DC
Maximum Supply Current For Sensors25 mA per input channels
Input Impedance250 Ohm
Height18.4 mm
Insulation Between Channels And Sensor Bus200 V
Status Led1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
Hot Swapping Fallbackyes for standard NIMs
Integral Linearity+/- 0.05 %FS

Offer Sustainability

Rohs Exemption InformationYes
Eu Rohs DirectivePro-active compliance (Product out of EU RoHS legal scope)
Mercury FreeYes
Environmental DisclosureENVPEP1511012EN
Sustainable Offer StatusGreen Premium product
Reach RegulationReference contains Substances of Very High Concern above the threshold
California Proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
WeeeThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs RegulationX
Circularity ProfileENVEOLI1511012EN

Environment

Product CertificationsCSA || C-tick || ATEX Cat 3G || FM Class 1 Division 2 || UL
Operating Altitude<= 6561.68 ft (2000 m)
Ambient Air Temperature For Operation32...140 °F without derating
Ambient Air Temperature For Storage-40...185 °F without derating
Ambient Air Temperature For Operation-25-70 °C
Shock Resistance30 gn 11 ms IEC 88 reference 2-27
Vibration Resistance+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
Ip Degree Of ProtectionIP20 conforming to EN 61131-2 class 1
Pollution Degree2 IEC 60664-1
Ambient Air Temperature For Storage-40-85 °C without derating
Relative Humidity95-95 % 60-60 °C without condensation

Docs


Other Schneider Electric items

Request a quote