Inductive proximity sensors XS, inductive sensor XS7 8x22x8, PBT, Sn2.5 mm, 12...24 VDC, M8 0.15 m
- Manufactured by:
- Schneider Electric
- Price (VAT excluded)
- € 43.70
- Nuova Elva code
- XS7J1A1PAL01M8
- Manufacturer code
- XS7J1A1PAL01M8
- Availability
- Send request for quotation
This XS flat (8 x 22 x 8 mm) inductive proximity sensor has a PBT case. It has a supply voltage of 12V to 24V DC. This general purpose rectangular inductive proximity sensor is mountable directly on a surface, with a single screw fixing point. It provides mechanical resistance and chemical withstand thanks to PBT case. It has a yellow LED for output status indication for easier sensor setup and troubleshooting. IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+70°C). It has a standard M8 connector, compatible with all existing market sensor cabling. It is C-Tick certified.
Specifications
| Cable Length | 0.15 m |
|---|---|
| Certifications | C-tick |
| Current | 10 mA |
| Depth | 8 mm |
| Enclosure Material | PBT |
| Height | 22 mm |
| Material | Plastic |
| Net Weight | 0.04 kg |
| Storage Temperature | -40-85 °C |
| Warranty Length | 18 months |
| Width | 8 mm |
Specifications | |
| Electrical Connection | remote male connector M8, 3 pins |
| Size | 8 mm |
| Wiring Technique | 3-wire |
| Ip Degree Of Protection | IP67 conforming to IEC 60529 |
| Series Name | general purpose |
| Body Type | fixed |
| Detector Flush Mounting Acceptance | flush mountable |
| Sensor Type | inductive proximity sensor |
| Switching Capacity In Ma | <= 100 mA DC overload and short-circuit protection |
| Sensor Design | flat form 8 x 22 x 8 |
| Enclosure Material | PBT |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Output Circuit Type | DC |
| Discrete Output Type | PNP |
| Discrete Output Function | 1 NO |
| Type Of Output Signal | discrete |
| Range Of Product | Telemecanique Inductive proximity sensors XS |
| Cable Length | 0.15 m |
| Sensor Name | XS7 |
| Material | plastic |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | <= 10 mA no-load |
| Differential Travel | 1...15% of Sr |
| Maximum Delay Recovery | 0.1 ms |
| Maximum Delay First Up | 5 ms |
| Supply Voltage Limits | 10-36 V DC |
| Wire Insulation Material | PvR |
| Detection Face | frontal |
| Width | 8 mm |
| Front Material | PBT |
| Depth | 8 mm |
| Height | 22 mm |
| Maximum Delay Response | 0.1 ms |
| Status Led | output state 1 LED yellow) |
| Operating Zone | 0-2 mm |
| Maximum Voltage Drop | <2 V closed) |
| Marking | CE |
| Net Weight | 0.04 kg |
| Switching Frequency | <= 2000 Hz |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP071001EN |
| Sustainable Offer Status | Green Premium product |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | C-tick |
| Ambient Air Temperature For Operation | -25-70 °C |
| Vibration Resistance | 25 gn +/- 2 mm 10-55 Hz)IEC 60068-2-6 |
| Shock Resistance | 50 gn 11 ms IEC 60068-2-27 |
| Ambient Air Temperature For Storage | -40-85 °C |
