Rotation monitoring for hazardous area dust, M30, Sn10mm, 6...150c/mn, NC, cable 2 m
- Manufactured by:
- Schneider Electric
- Price (VAT excluded)
- € 206.46
- Nuova Elva code
- XSAV11373EX
- Manufacturer code
- XSAV11373EX
- Availability
- Send request for quotation
This sensor is dedicated to rotation monitoring in hazardous areas. It complies with the 2014/34/EU - ATEX directive. It provides an economical solution for detecting slip, belt breakage, drive shaft shear and overloading. Dedicated to rotation monitoring, it is suitable for conveyor belts, bucket elevators and Archemedian screws. And also for grinders, crushers, pumps, centrifugal driers, mixers, etc. This product is a cylindrical sensor, flush mountable in metal, diameter 30mm, threaded M30 x 1.5. It features a cylindrical metal case and a 2m long cable. It has a sensing distance of 10mm. Its adjustable frequency range is 6 impluses/min to 150 impluses/min. Three-wire, DC supply, 12V to 48V, NC function, PNP solid-state output.
Specifications
| Cable Length | 2 m |
|---|---|
| Certifications | IEC-Ex INE 17.0006 |
| Current | 0-15 mA |
| Enclosure Material | Nickel Plated Brass |
| Length | 81 mm |
| Material | Metal |
| Standard | EN/IEC 60079-0 |
| Thread Type | M30 X 1.5 |
| Warranty Length | 18 months |
Specifications | |
| Electrical Connection | cable |
| Wiring Technique | 3-wire |
| Ip Degree Of Protection | IP67 conforming to IEC 60529 |
| Series Name | Application |
| Body Type | fixed |
| [Sn] Nominal Sensing Distance | 10 mm |
| Sensor Type | inductive proximity sensor |
| Detector Flush Mounting Acceptance | flush mountable |
| Switching Capacity In Ma | <= 200 mA overload and short-circuit protection |
| Sensor Design | cylindrical M30 |
| Enclosure Material | Nickel Plated Brass |
| Discrete Output Type | PNP |
| Output Circuit Type | DC |
| Device Application | rotation monitoring ATEX dust |
| [Us] Rated Supply Voltage | 12...48 V DC reverse polarity protection |
| Discrete Output Function | 1 NC |
| Type Of Output Signal | discrete |
| Range Of Product | Telemecanique Inductive proximity sensors XS |
| Cable Length | 2 m |
| Sensor Name | XSA |
| Material | metal |
| Size | 30 mm |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | 0...15 mA no-load |
| Thread Type | M30 x 1.5 |
| Sensing Range | > 0.31...0.59 in (> 8...15 mm) |
| Adjustable Frequency Range | 6-150 cyc/mn |
| Differential Travel | 3...15% of Fr |
| Run-Up Delay At Power-Up | 9 s standard |
| Supply Voltage Limits | 10-58 V DC |
| Wire Insulation Material | PvR |
| Detection Face | frontal |
| Cable Composition | 3 x 0.34 mm² |
| Front Material | PPS |
| Status Led | output state 1 LED red) |
| Repeat Accuracy | 3% of Sr |
| Operating Zone | 0-8 mm |
| Maximum Voltage Drop | <1.8 V closed state) |
| Threaded Length | 57 mm |
| Marking | II2 D-Ex tb IIIC T90°C Db IP67 |
| Length | 81 mm |
| Switching Frequency | <= 100 Hz |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111006EN |
| Sustainable Offer Status | Green Premium product |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Circularity Profile | ENVEOLI1110045 |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | INERIS 04ATEX0022 || IEC-Ex INE 17.0006 |
| Ambient Air Temperature For Operation | -20-60 °C |
| Standards | EN/IEC 60079-31 || EN/IEC 60079-0 |
| Dust Zone | zone 21 - 22 |
| Directives | 2014/34/EU - ATEX directive |
| Environmental Characteristic | hazardous location |
