Photoelectric sensors XU, XUB, emitter, 12...24 VDC, cable 2 m
- Manufactured by:
- Schneider Electric
- Price (VAT excluded)
- € 31.90
- Nuova Elva code
- XUB2BKSNL2T
- Manufacturer code
- XUB2BKSNL2T
- Availability
- Send request for quotation
This design 18 single mode (thru-beam system) photo-electric transmitter has a nickel plated brass case. It has a supply voltage of 12V to 24V DC. This mono-mode cylindrical photoelectric emitter has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor. 1 LED display allows to identify status of the sensor. IP65 and IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified.
Specifications
| Cable Length | 2 m |
|---|---|
| Certifications | CE |
| Current | 35 mA |
| Diameter | 18 mm |
| Enclosure Material | Nickel Plated Brass |
| Length | 46 mm |
| Material | Metal |
| Operating Temperature | -25-55 °C |
| Storage Temperature | -40-70 °C |
| Warranty Length | 18 months |
Specifications | |
| Electrical Connection | cable |
| Series Name | general purpose single mode |
| Detection System | thru beam |
| Sensor Design | cylindrical M18 |
| Supply Circuit Type | DC |
| Electronic Sensor Type | photo-electric sensor transmitter |
| [Sn] Nominal Sensing Distance | 15-15 m thru beam need a receiver |
| Type Of Output Signal | discrete |
| Range Of Product | Telemecanique Photoelectric sensors XU |
| Cable Length | 2 m |
| Emission | infrared thru beam |
| Line Of Sight Type | axial |
| Sensor Name | XUB |
| Material | metal |
| Wiring Technique | 3-wire |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | 35 mA no-load |
| Length | 46 mm |
| Maximum Delay Recovery | 1 ms |
| Maximum Delay First Up | 15 ms |
| Maximum Sensing Distance | 20 m thru beam |
| Supply Voltage Limits | 10-36 V DC |
| Switching Capacity In Ma | <= 100 mA overload and short-circuit protection) |
| Wire Insulation Material | PvR |
| Enclosure Material | Nickel Plated Brass |
| Output Type | solid state |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Switching Frequency | <= 500 Hz |
| Maximum Delay Response | 1 ms |
| Diameter | 18 mm |
| Status Led | 1 LED green)supply on |
| Setting-Up | without sensitivity adjustment |
| Lens Material | PMMA |
| Maximum Voltage Drop | <1.5 V closed state) |
| Add On Input | test by emission breaking |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111230EN |
| Sustainable Offer Status | Green Premium product |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Circularity Profile | ENVEOLI111208EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | CSA || CE || UL |
| Ambient Air Temperature For Operation | -25-55 °C |
| Vibration Resistance | 7 gn +/- 1.5 mm 10-55 Hz) IEC 60068-2-6 |
| Shock Resistance | 30 gn 11 ms) IEC 60068-2-27 |
| Ambient Air Temperature For Storage | -40-70 °C |
| Ip Degree Of Protection | IP65 double insulation IEC 60529 || IP67 double insulation IEC 60529 |
