ACT20M-AI-AO-E-S
- Manufactured by:
- WEIDMULLER
- Price (VAT excluded)
- € 97.92
- Nuova Elva code
- 1176010000
- Manufacturer code
- 1176010000
- Availability
- Send request for quotation
Signal converter/insulator, Configurable, without sensor supply, Input : I / U, Output : I / U
Specifications
| Depth | 114.3 mm |
|---|---|
| Height | 112.5 mm |
| Max. Operating Temperature | 70 °C |
| Min. Operating Temperature | 0 °C |
| Net Weight | 83.5 g |
| Operating Temperature | 0 °C...70 °C |
| Storage Temperature | -40 °C...85 °C |
| Voltage | 300 V |
| Width | 6.1 mm |
Dimensions And Weights | |
| Width | 6.1 mm |
| Width (inches) | 0.24 inch |
| Height | 112.5 mm |
| Height (inches) | 4.429 inch |
| Depth | 114.3 mm |
| Depth (inches) | 4.5 inch |
| Net weight | 83.5 g |
Temperatures | |
| Humidity | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | 0 °C |
| Storage temperature, max. | 85 °C |
| Storage temperature, min. | -40 °C |
| Operating temperature | 0 °C...70 °C |
| Ambient temperature | -25 °C...+70 °C |
| Storage temperature | -40 °C...85 °C |
Probability Of Failure | |
| MTBF | 249 Years |
Environmental Product Compliance | |
| REACH SVHC | Lead 7439-92-1 |
Rated Data Ul | |
| UL certificate | E337701.pdf |
Input | |
| Number of inputs | 1 |
| Sensor | Voltage source, Current source |
| Input voltage | configurable, 0(2)…10 V, 0(1)…5 V |
| Input resistance, voltage | >500 kΩ |
| Input current | configurable, 0...20 mA, 4…20mA |
| Voltage drop, current input | <1,5 V |
| Input resistance, current | 70 Ω |
| Input frequency | 100 Hz |
| Voltage drop | <1,5 V |
Output | |
| Number of outputs | 1 |
| Output voltage, note | configurable, 0(2)...10 V, 0(1)...5 V |
| Output current | configurable, 0...20 mA, 4...20 mA |
| Cut-off frequency (-3 dB) | 100 Hz |
| load impedance voltage | ≥ 10 kΩ |
| load impedance current | ≤ 600 Ω, @ max 23mA |
General Data | |
| Accuracy | < 0.2 % of measuring range |
| Configuration | DIP switch |
| Galvanic isolation | 3-way isolator |
| Power consumption, max. | 0.8 W |
| Power consumption, typ. | 0.56 W |
| Rail | TS 35 |
| Step response time | ≤ 7 ms |
| Temperature coefficient | ≤ 0.015 % / °C |
| Voltage supply | 24 V DC ± 30 % |
Insulation Coordination | |
| EMC standards | IEC 61326-1, NE 21 |
| Galvanic isolation | 3-way isolator |
| Insulation voltage | 2.5 kVeff /1 min. |
| Pollution severity | 2 |
| Rated voltage | 300 Veff |
| Surge voltage category | II |
Connection Data | |
| Type of connection | Screw connection |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Clamping range, rated connection | 2.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 30 |
| Wire connection cross section AWG, max. | AWG 14 |
Ratings Iecex/Atex/Cul | |
| Certificate no. (cULus) | E337701 |
Product Information | |
| Product information | The configurable DC isolating amplifier ACT20M-AI-AO-E-S isolates and converts analogue signals. An analogue input signal is linearly converted into an analogue output signal and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring or the Weidmüller rail bus. |
Tender Specification Sheets | |
| Long specification | Universal standard signal isolating amplifier1-channel signal isolating amplifier in 6.1 mm width with external power supply,for transmitting and isolating analogue DC current signals 0/4 to 20 mA and voltage signals 0/2 to 10 V // 0/1 to 5 V. Input and output signals can be configured with DIP switches.Add-on housing for TS35 rail mounting Dimensions: L/W/H 114.3/ 6.1/ 112.5 mm Screw connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mA 0/2...10 V or 0/1...10 V Isolation EN 61010-1, 3-way isolation up to 2.5 kV AC/DC of all circuits against each otherTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2 Approvals cULus, DNV, GL Output 0/4...20 mA 0/2...10 V or 0/1...5 V Load resistance < 600 Ohm/ Strom/> 10 kOhm/ voltageTransmission error < 0,2 % v. E. Limit frequency 100 HzAuxiliary power 24 VDC +/- 30 % Power loss approx. 0.8 W Ambient temperature range 0 °C...+70 °C Type ACT20M-AI-AO-E-S |
| Short specification | Universal standard signal isolating amplifier1-channel signal isolating amplifier in 6.1 mm width with external power supply,for transmitting and isolating analogue DC current signals 0/4...20 mA and voltage signals0/2...10V // 0/1...5 V. I/O signals are configured with DIP switches. |
Classifications | |
| ETIM 6.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| eClass 9.0 | 27-21-01-20 |
| eClass 9.1 | 27-21-01-20 |
| eClass 10.0 | 27-21-01-20 |
Approvals | |
| Approvals | CE, CULUS, DETNORVER, DNV GL, EAC |
| ROHS | Conform |
| UL File Number Search | E337701 |
