Fluke 87V Industrial Multimeter
- Produttore:
- FLUKE
Fluke 87V Industrial Multimeter delivers accurate frequency measurements on adjustable speed drives, captures intermittents as fast 250 µS. Learn More.
Features
Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
When productivity is on the line and you need to solve problems fast, the Fluke 87V delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V industrial multimeter, allows you to gain productivity by taking the guesswork out of drive system troubleshooting even in loud, high energy, and high altitude locations.
Built-in thermometer allows temperature measurements without a separate thermometer
Peak Min/Max allows capture of intermittents as fast 250 µS
Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings
CAT III 1000V, CAT IV 600V safety rated
Designed and built in the U.S.A.
Lifetime warranty
Fluke builds the most trusted tools in the world and that means more than just the Fluke 87V. If you work with HVAC equipment, need a small meter for small spaces or work in the electrical installer's and repairman's world, check out the full family of Fluke digital multimeters.
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
True RMS AC voltage and current for accurate measurements on non linear signals
Selectable filter for accurate voltage and frequency measurements on motor drives
0.05% DC accuracy
6000 counts, 3-3/4 digits
4-1/2 digit mode for precise measurements (20,000 counts)
Measure up to 1000 VAC and DC
Measure up to 10 A, 20 A for up to 30 seconds
Built in thermometer lets you carry one less tool (TC probe included)
Frequency to 200 kHz and % duty cycle
Resistance, continuity and diode test
10,000 µF capacitance range for components and motor caps
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead interference from low ohms measurements
Auto and manual ranging for maximum flexibility
Touch Hold to capture stable readings avoiding noisy signals
Large display digits and two-level bright white backlight for increased visibility
Analog bargraph for fast changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Improved selectable sleep mode for long battery life
Access door for fast battery changes without breaking the calibration seal
Classic" design with new removable holster with built in test lead and probe storage
Lifetime warranty
All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals
Until now, there hasn't been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.
Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
Measure AC current with an optional current clamp accessory
Compare reading from the 87V with the display on the ASD
Special shielding blocks high frequency, high-energy noise generated by large drive systems
TL75 Test Leads
AC175 Alligator Clips
Holster
9V Battery (Installed)
80BK Temperature Probe
Fluke TLK 220
Fluke C100
Fluke C101
Fluke C1600
Fluke C25
Fluke C35
Fluke C550
Fluke C800
Fluke CAMO-C25
Fluke CXT80
Fluke H80M
Fluke TPAK
Fluke AC220
Fluke AC280
Fluke AC283
Fluke AC285
Fluke AC87
Fluke AC89
Fluke BP980
Fluke TLK225
Fluke i1010
Fluke i1010 Kit
Fluke i200
Fluke i2000 Flex
Fluke i200s
Fluke i400
Fluke i410
Fluke i410 Kit
Fluke FOM
Fluke 80K 40
Fluke 80K 6
Fluke-PV350
Fluke L200
Fluke L210
Fluke L215
Fluke MeterCleaner Wipes
Fluke 80AK A
Fluke 80PK 11
Fluke 80PK 24
Fluke 80PK 25
Fluke 80PK 26
Fluke 80PK 27
Fluke 80PK 8
Fluke H900
Fluke TL220
Fluke TL221
Fluke TL222
Fluke TL223
Fluke TL224
Fluke TL225
Fluke TL26A
Fluke TL40
Fluke TL71
Fluke TL75
Fluke TL76
Fluke TL81A
Fluke TL930
Fluke TL932
Fluke TL935
Fluke TL940
Fluke TL950
Fluke TL960
Fluke TL970
Fluke TLK220
Fluke 85RF
Fluke TL80A
Fluke TL910
Fluke TP1
Fluke TP2
Fluke TP220
Fluke TP4
Fluke TP74
Fluke TP80
Fluke TP912
Fluke TP920
Fluke 87V Ex
Fluke 87V/E Kit
Fluke 87V/E2 Kit
Fluke 87V/IMSK Kit
Fluke 83V
Fluke 87V/E2 Industrial Electrician Combo Kit
Fluke 87V/IMSK Industrial Multimeter Service Combo Kit
Fluke 83V Average Responding Industrial Multimeter
Fluke 87V/AEK Advanced Electronic Kit
Fluke TL175 TwistGuard Test Leads
Fluke i400 AC Current Clamp
Fluke i410 AC/DC Current Clamp
Fluke 289 True-RMS Industrial Logging Multimeter
Fluke 28 II Rugged Digital Multimeter
Fluke 113 Digital Multimeter
Fluke 114 Digital Multimeter
Fluke 116/62 MAX+ Technician’s Combo Kit
Fluke 117/323 Electricians Multimeter Combo Kit
Fluke CAMO-C25 Camouflage Carrying Case
Fluke 110 Plus Digital Multimeter
Specifications
Operating Temperature | 20 To 55 °C |
---|---|
Storage Temperature | 40 To 60 °C |
Environmental Specifications | |
Operating Altitude | 2000 m |
Humidity (without condensation) | 0% – 90% (0°C – 35°C) 0% – 70% (35°C – 55°C) |
Storage temperature | –40°C to + 60°C |
Operating temperature | –20°C to + 55°C |
Safety Specifications | |
Agency approvals | UL, CSA, TÜV, VDE listed |
Overvoltage category | EN 61010–1 to 1000 V CAT III, 600V CAT IV |