Standard Proximity Sensor
- Produttore:
- OMRON
- Prezzo (IVA esclusa)
- € 123.48
- Codice Nuova Elva
- E2EX7D1N2MOMS
- Codice produttore
- E2E-X7D1-N 2M
- Disponibilità
- Invia RdO
Inductive type, Shielded, M18*1mm, DC 2-wire models, Sensing distance 7 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(2 m)
Specifications
| Material | Brass Nickel Plating |
|---|---|
| Number of Wires | 2 |
| Voltage | 24 V |
| Weight | 130 g |
Ratings / Performance | |
| Type | Shielded |
| Leakage current | 0.8 mA max. |
| Control output (Output type) | DC 2-wire models with polarity |
| Control output (Switching capacity) | 3 to 100 mA |
| Indicator | Operation indicator (red), Operation setting indicator (green) |
| Operation mode | NO |
| Protective circuit | Surge suppressor |
| Protective circuit | Output short-cut protection |
| Standard or Different frequency | Standard |
| Sensing method | Inductive type |
| Ambient temperature | Operating: -25 to 70 °C |
| Ambient temperature | Storage: -40 to 85 °C |
| Ambient humidity | Operating: 35 to 95%RH |
| Ambient humidity | Storage: 3595%RH |
| Temperature influence | +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL |
| Temperature influence | (As the basis for sensing distance of 23 CEL) |
| Voltage influence | +/- 1% Max. of sensing distance in rated voltage range +/- 15%. |
| Voltage influence | (As the basis for sensing distance at standard power voltage) |
| Insulation resistance | 50 MOhm Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
| Sensing distance | 7 mm-10% to +10% |
| Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 10 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Degree of protection | Company standard: Oil-proof |
| Connection method | Pre-wired models(Cable length: 2 m) |
| Weight (Packed state) | approx. 130 g |
| Material (case) | Brass nickel plating |
| Material (sensing surface) | PBT |
| Material (clamping nuts) | Brass nickel plating |
| Material (toothed washer) | Iron zinc plating |
| Setting distance | 0 to 5.6 mm |
| Accessories | Instruction manual |
| Differential distance | 10% Max. of sensing distance |
| Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
| Standard sensing object | Iron 18 x 18 x 1 mm |
| Power supply voltage | 12 to 24 VDC ripple(p-p) 10% Max. |
| Operating voltage range | 10 to 30 VDC |
