PCB terminal block - MKDSN 1,5/ 2-5,08 - 1729128
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 0.59
- Codice Nuova Elva
- 1729128
- Codice produttore
- 1729128
- Disponibilità
- Invia RdO
PCB terminal block, nominal current: 13.5 A, rated voltage (III/2): 400 V, nominal cross section: 1.5 mm², pitch: 5.08 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm
Features
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Extremely small design for the respective conductor cross section
The latching on the side enables various numbers of positions to be combined
EAC
SEV
IECEE CB Scheme
DNV GL
cULus Recognized
Specifications
| Height | 13.5 mm |
|---|---|
| Length | 8.1 mm |
| Number of Connections | 2 |
| Pitch | 5.08 mm |
| Strip Length | 6 mm |
| Width | 10.16 mm |
Air clearances and creepage distances | |
| Clearances and creepage distances | IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 |
| Specification | IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 |
| Minimum clearance - inhomogeneous field (III/3) | 3 mm |
| Minimum clearance - inhomogeneous field (III/2) | 3 mm |
| Minimum clearance - inhomogeneous field (II/2) | 3 mm |
| Minimum creepage distance value (III/3) | 3.2 mm |
| Minimum creepage distance value (III/2) | 2 mm |
| Minimum creepage distance value (II/2) | 3.2 mm |
| Note on connection cross section | With connected conductor 1.5 mm² (solid). |
Connection capacity | |
| Connection method | Screw connection with tension sleeve |
| pluggable | no |
| Conductor cross section solid | 0.14 mm² - 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 1.5 mm² |
| Conductor cross section AWG / kcmil | 26 - 16 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² - 1 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² - 1.5 mm² |
| 2 conductors with same cross section, solid | 0.14 mm² - 0.75 mm² |
| 2 conductors with same cross section, flexible | 0.14 mm² - 0.75 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² - 0.5 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² - 0.75 mm² |
| Stripping length | 6 mm |
| Torque | 0.5 Nm - 0.6 Nm |
General product information | |
| Type of note | Note on application |
| Note | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
Ambient conditions | |
| Ambient temperature (storage/transport) | -40 °C - 70 °C |
| Ambient temperature (assembly) | -5 °C - 100 °C |
| Ambient temperature (operation) | -40 °C - 100 °C (Depending on the current carrying capacity/derating curve) |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions for the product | |
| Caption | Schematic representation – for additional information, see product range drawing in the Download Center |
| Length [ l ] | 8.1 mm |
| Width [ w ] | 10.16 mm |
| Height [ h ] | 13.5 mm |
| Pitch | 5.08 mm |
| Height (without solder pin) | 10 mm |
| Solder pin [P] | 3.5 mm |
| Pin dimensions | 0.5 x 1 mm |
Item properties | |
| Brief article description | PCB terminal block |
| Number of levels | 1 |
| Number of connections | 2 |
| Number of potentials | 2 |
| Range of articles | MKDSN 1,5 |
| Pitch | 5.08 mm |
| Number of positions | 2 |
| Connection method | Screw connection with tension sleeve |
| Drive form screw head | Slotted (L) |
| Screw thread | M3 |
| Mounting type | Wave soldering |
| Pin layout | Linear pinning |
Vibration test | |
| Amplitude | 0.35 mm (10 - 60.1 Hz) |
| Acceleration | 5 g (60.1 - 150 Hz) |
| Test duration per axis | 2.5 h |
| Specification | IEC 60068-2-6:2007-12 |
| Result | Test passed |
| Frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
Termination and connection method | |
| Test for conductor damage and slackening | IEC 60999-1:1999-11 |
| Test for conductor damage and slackening | Test passed |
Electrical tests | |
| Rated current | 13.5 A |
| Conductor cross section | 1.5 mm² |
| Rated voltage (III/2) | 400 V |
| Rated surge voltage (III/2) | 4 kV |
Processing notes | |
| Process | Wave soldering |
| Specification | Following IEC 61760-1:2006-04 |
| Specification | Following IEC 60068-2-54:2006-04 |
Electrical parameters | |
| Nominal current | 13.5 A |
| Nom. voltage | 400 V |
| Rated voltage | 250 V |
| Rated voltage (III/2) | 400 V |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
Temperature-rise test | |
| Result | Test passed |
| Specification | IEC 60947-7-4:2013-08 |
Pull-out test | |
| Pull-out test | IEC 60999-1:1999-11 |
| Pull-out test | Test passed |
| Conductor cross section / conductor type / tensile force | 0.14 mm² / flexible / > 10 N |
| Conductor cross section / conductor type / tensile force | 0.14 mm² / solid / > 10 N |
| Conductor cross section / conductor type / tensile force | 1.5 mm² / flexible / > 40 N |
| Conductor cross section / conductor type / tensile force | 1.5 mm² / solid / > 40 N |
Packaging information | |
| Type of packaging | packed in cardboard |
| Pieces per package | 250 |
| Denomination packing units | Pcs. |
Material data - contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | Tin-plated |
| Metal surface terminal point (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface terminal point (middle layer) | Nickel (2 - 3 µm Ni) |
| Metal surface soldering area (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface soldering area (middle layer) | Nickel (2 - 3 µm Ni) |
Material data - housing | |
| Housing color | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Dimensions for PCB design | |
| Hole diameter | 1.3 mm |
Standards and Regulations | |
| Connection in acc. with standard | EN-VDE |
| Connection in acc. with standard | CSA |
| Flammability rating according to UL 94 | V0 |
Current carrying capacity / derating curves | |
| Specification | IEC 60947-7-4 |
