Printed-circuit board connector - IC 2,5/ 8-STF-5,08 - 1825378
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 6.14
- Codice Nuova Elva
- 1825378
- Codice produttore
- 1825378
- Disponibilità
- Invia RdO
PCB connector, nominal current: 12 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 8, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin
Features
Well-known connection principle allows worldwide use
Easy PCB replacement thanks to plug-in modules
Screwable flange for superior mechanical stability
Inverted connector with pin contacts for touch-proof device outputs or free-hanging cable/cable connections
Can be combined with the MSTB 2,5 range
Low temperature rise, thanks to maximum contact force
VDE Zeichengenehmigung
EAC
IECEE CB Scheme
CSA
cULus Recognized
Specifications
| Height | 15 mm |
|---|---|
| Length | 19 mm |
| Number of Connections | 8 |
| Pitch | 5.08 mm |
| Strip Length | 7 mm |
| Width | 50.76 mm |
Environmental and durability tests (E) | |
| Specification | IEC 61984:2008-10 |
| Result, degree of protection, IP code | Finger safety with IP20 test finger |
Ambient conditions | |
| Ambient temperature (storage/transport) | -40 °C - 70 °C |
| Ambient temperature (assembly) | -5 °C - 100 °C |
| Ambient temperature (operation) | -40 °C - 100 °C (dependent on the derating curve) |
Connection capacity | |
| Connection method | Screw connection with tension sleeve |
| pluggable | Yes |
| Conductor cross section solid | 0.2 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² - 2.5 mm² |
| Conductor cross section AWG / kcmil | 24 - 12 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² - 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² - 2.5 mm² |
| 2 conductors with same cross section, solid | 0.2 mm² - 1 mm² |
| 2 conductors with same cross section, flexible | 0.2 mm² - 1.5 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² - 1 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² - 1.5 mm² |
| Stripping length | 7 mm |
| Torque | 0.5 Nm - 0.6 Nm |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Item properties | |
| Brief article description | Printed-circuit board connector |
| Locking | Screw flange |
| Number of levels | 1 |
| Number of connections | 8 |
| Number of potentials | 8 |
| Plug-in system | CLASSIC COMBICON |
| Type of contact | Male connector |
| Range of articles | IC 2,5/..-STF |
| Pitch | 5.08 mm |
| Number of positions | 8 |
| Connection method | Screw connection with tension sleeve |
| Drive form screw head | Slotted (L) |
| Screw thread | M3 |
Flange specifications | |
| Type of locking | Screw locking |
| Mounting flange | Screw flange |
| Torque | 0.3 Nm |
Termination and connection method | |
| Test for conductor damage and slackening | IEC 60999-1:1999-11 |
| Test for conductor damage and slackening | Test passed |
Electrical parameters | |
| Nominal current | 12 A |
| Nom. voltage | 320 V |
| Rated voltage | 250 V |
| Rated voltage (III/2) | 320 V |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
Dimensions for the product | |
| Length [ l ] | 19 mm |
| Width [ w ] | 50.76 mm |
| Height [ h ] | 15 mm |
| Pitch | 5.08 mm |
| Height (without solder pin) | 15 mm |
Pull-out test | |
| Pull-out test | IEC 60999-1:1999-11 |
| Pull-out test | Test passed |
| Conductor cross section / conductor type / tensile force | 0.2 mm² / solid / > 10 N |
| Conductor cross section / conductor type / tensile force | 0.2 mm² / flexible / > 10 N |
| Conductor cross section / conductor type / tensile force | 2.5 mm² / solid / > 50 N |
| Conductor cross section / conductor type / tensile force | 2.5 mm² / flexible / > 50 N |
Packaging information | |
| Type of packaging | packed in cardboard |
| Pieces per package | 50 |
| Denomination packing units | Pcs. |
Climatic tests (D) | |
| Specification | ISO 6988:1985-02 |
| Cold stress | -40 °C/2 h |
| Thermal stress | 100 °C/168 h |
| Corrosive stress | 0.2 dm³ SO₂ on 300 dm³/40 °C/1 cycle |
| Impulse withstand voltage at sea level | 4.8 kV |
| Power-frequency withstand voltage | 2.21 kV |
Material data - contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | Tin-plated |
| Metal surface terminal point (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface terminal point (middle layer) | Nickel (2 - 3 µm Ni) |
| Metal surface contact area (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface contact area (middle layer) | Nickel (2 - 3 µm Ni), |
Material data - housing | |
| Housing color | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Mechanical tests (A) | |
| Test specification | IEC 61984 |
| Insertion strength per pos. approx. | 8 N |
| Withdraw strength per pos. approx. | 7 N |
| Polarization when inserted requirement >20 N | Test passed |
Durability tests (B) | |
| Insertion/withdrawal cycles | 25 |
| Contact resistance R2 | 3 mΩ |
| Impulse withstand voltage at sea level | 4.8 kV |
| Power-frequency withstand voltage | 2.21 kV |
| Insulation resistance, neighboring positions | 2 TΩ |
| Specification | IEC 60512-9-1:2010-03 |
| Contact resistance R1 | 2.9 mΩ |
Current carrying capacity / derating curves | |
| Specification | IEC 61984 |
Air clearances and creepage distances | |
| Clearances and creepage distances | IEC 60664-1:2007-04 |
| Specification | IEC 60664-1:2007-04 |
| Minimum clearance - inhomogeneous field (III/3) | 3 mm |
| Minimum clearance - inhomogeneous field (III/2) | 3 mm |
| Minimum clearance - inhomogeneous field (II/2) | 3 mm |
| Minimum creepage distance value (III/3) | 3.2 mm |
| Minimum creepage distance value (III/2) | 1.6 mm |
| Minimum creepage distance value (II/2) | 3.2 mm |
