Printed-circuit board connector - MVSTBR 2,5/ 3-STF-5,08 - 1835106
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 1.98
- Codice Nuova Elva
- 1835106
- Codice produttore
- 1835106
- Disponibilità
- Invia RdO
PCB connector, nominal current: 12 A, rated voltage (III/2): 320 V, nominal cross section: 2.5 mm², number of positions: 3, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, color: green, contact surface: Tin
Features
Well-known connection principle allows worldwide use
Screwable flange for superior mechanical stability
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
VDE Zeichengenehmigung
EAC
IECEE CB Scheme
CSA
cULus Recognized
Specifications
| Height | 26 mm |
|---|---|
| Length | 12.6 mm |
| Number of Connections | 3 |
| Pitch | 5.08 mm |
| Strip Length | 7 mm |
| Width | 25.4 mm |
Environmental and durability tests (E) | |
| Specification | IEC 61984:2008-10 |
| Result, degree of protection, IP code | Finger safety with IP20 test finger |
Ambient conditions | |
| Ambient temperature (storage/transport) | -40 °C - 70 °C |
| Ambient temperature (assembly) | -5 °C - 100 °C |
| Ambient temperature (operation) | -40 °C - 100 °C (dependent on the derating curve) |
Connection capacity | |
| Connection method | Screw connection with tension sleeve |
| pluggable | Yes |
| Conductor cross section solid | 0.2 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² - 2.5 mm² |
| Conductor cross section AWG / kcmil | 24 - 12 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² - 2.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² - 2.5 mm² |
| 2 conductors with same cross section, solid | 0.2 mm² - 1 mm² |
| 2 conductors with same cross section, flexible | 0.2 mm² - 1.5 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² - 1 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² - 1.5 mm² |
| Cylindrical gauge a x b / diameter | 2.8 mm x 2.0 mm / 2.4 mm |
| Stripping length | 7 mm |
| Torque | 0.5 Nm - 0.6 Nm |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Item properties | |
| Brief article description | Printed-circuit board connector |
| Locking | Screw flange |
| Number of levels | 1 |
| Number of connections | 3 |
| Number of potentials | 3 |
| Plug-in system | CLASSIC COMBICON |
| Type of contact | Female connector |
| Range of articles | MVSTBR 2,5/..-STF |
| Pitch | 5.08 mm |
| Number of positions | 3 |
| Connection method | Screw connection with tension sleeve |
| Drive form screw head | Slotted (L) |
| Screw thread | M3 |
Flange specifications | |
| Type of locking | Screw locking |
| Mounting flange | Screw flange |
| Torque | 0.3 Nm |
Termination and connection method | |
| Test for conductor damage and slackening | IEC 60999-1:1999-11 |
| Test for conductor damage and slackening | Test passed |
Electrical parameters | |
| Nominal current | 12 A |
| Nom. voltage | 320 V |
| Rated voltage | 250 V |
| Rated voltage (III/2) | 320 V |
| Rated voltage (II/2) | 630 V |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
Dimensions for the product | |
| Length [ l ] | 12.6 mm |
| Width [ w ] | 25.4 mm |
| Height [ h ] | 26 mm |
| Pitch | 5.08 mm |
| Height (without solder pin) | 26 mm |
Pull-out test | |
| Pull-out test | IEC 60999-1:1999-11 |
| Pull-out test | Test passed |
| Conductor cross section / conductor type / tensile force | 0.2 mm² / solid / > 10 N |
| Conductor cross section / conductor type / tensile force | 0.2 mm² / flexible / > 10 N |
| Conductor cross section / conductor type / tensile force | 2.5 mm² / solid / > 50 N |
| Conductor cross section / conductor type / tensile force | 2.5 mm² / flexible / > 50 N |
Packaging information | |
| Type of packaging | packed in cardboard |
| Pieces per package | 50 |
| Denomination packing units | Pcs. |
Climatic tests (D) | |
| Specification | ISO 6988:1985-02 |
| Cold stress | -40 °C/2 h |
| Thermal stress | 100 °C/168 h |
| Corrosive stress | 0.2 dm³ SO₂ on 300 dm³/40 °C/1 cycle |
| Impulse withstand voltage at sea level | 4.8 kV |
| Power-frequency withstand voltage | 2.21 kV |
Material data - contact | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu alloy |
| Surface characteristics | hot-dip tin-plated |
| Metal surface terminal point (top layer) | Tin (4 - 8 µm Sn) |
| Metal surface contact area (top layer) | Tin (4 - 8 µm Sn) |
Material data - housing | |
| Housing color | green (6021) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability rating according to UL 94 | V0 |
Mechanical tests (A) | |
| Test specification | IEC 61984 |
| Insertion strength per pos. approx. | 8 N |
| Withdraw strength per pos. approx. | 6 N |
| Polarization when inserted requirement >20 N | Test passed |
| Contact holder in insert requirements >20 N | Test passed |
Durability tests (B) | |
| Contact resistance R2 | 2.4 mΩ |
| Impulse withstand voltage at sea level | 4.8 kV |
| Power-frequency withstand voltage | 2.21 kV |
| Insulation resistance, neighboring positions | > 75 TΩ |
| Specification | IEC 60512-9-1:2010-03 |
| Contact resistance R1 | 2.4 mΩ |
| Insertion/withdrawal cycles | 25 |
Current carrying capacity / derating curves | |
| Specification | IEC 61984 |
Air clearances and creepage distances | |
| Clearances and creepage distances | IEC 60664-1:2007-04 |
| Specification | IEC 60664-1:2007-04 |
| Minimum clearance - inhomogeneous field (III/3) | 3 mm |
| Minimum clearance - inhomogeneous field (III/2) | 3 mm |
| Minimum clearance - inhomogeneous field (II/2) | 3 mm |
| Minimum creepage distance value (III/3) | 3.2 mm |
| Minimum creepage distance value (III/2) | 3 mm |
| Minimum creepage distance value (II/2) | 3.2 mm |
