Network isolator - FL ISOLATOR 100-RJ/RJ - 2313931
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 259.76
- Codice Nuova Elva
- 2313931
- Codice produttore
- 2313931
- Disponibilità
- Invia RdO
Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 100 Mbps. Possible to connect two RJ45 plugs.
Features
No power supply required
Dielectric strength of up to 4 kV
Protection against aggressive environmental influences, particularly harsh industrial environments, thanks to coated PCB
Approval for railway applications (rolling stock) according to EN 50155 and EN 50121
Extended temperature range of -25°C to +85°C
Continuous insulation voltage of 250 Vrms
Electrical isolation of data cables and cable shielding
Mounting on EN DIN rails
Shipbuilding approval in accordance with DNV GL
cULus Listed
EAC
DNV GL
UL Listed
cUL Listed
Specifications
| Depth | 92 mm |
|---|---|
| Height | 99 mm |
| Width | 22.5 mm |
Interfaces | |
| Interface 1 | Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 |
| Interface | Ethernet |
| No. of ports | 1 |
| Transmission length | ≤ 100 m (Total length across both ports (dependent on data rate and cable used)) |
| Interface 2 | Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 |
| Connection method | RJ45 socket, shielded |
| Serial transmission speed | 10/100 Mbps |
Ambient conditions | |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C - 75 °C |
| Ambient temperature (storage/transport) | -25 °C - 85 °C |
| Permissible humidity (operation) | 10 % - 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % - 95 % (non-condensing) |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Conformance/approvals | |
| Designation | EAC |
| Identification | EAC |
| Designation | UL, USA/Canada |
| Identification | 508 Listed |
| Designation | Corrosive gas test |
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
| Designation | Shipbuilding |
| Identification | DNV GL |
| Temperature | B |
| Humidity | A |
| Vibration | A |
| EMC | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
Environmental Product Compliance | |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions | |
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 92 mm |
Standards and Regulations | |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Type of test | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 |
| Test result | 5g, 10...150 Hz, 2.5 h, in XYZ direction |
| Type of test | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 |
| Test result | 25g, 11 ms period, half-sine shock pulse |
| Standards/regulations | EN 61000-4-2 |
| Standards/regulations | EN 61000-4-3 |
| Frequency range | 26 MHz - 3 GHz (Test Level 3) |
| Standards/regulations | EN 61000-4-4 |
| Standards/regulations | EN 61000-6-4 |
| Standards/regulations | EN 61000-4-6 |
| Frequency range | 0.15 MHz - 80 MHz |
| Standards/regulations | EN 50121 and EN 50155 (for railway applications) |
