D-SUB bus connector - SUBCON-PLUS-PROFIB/PG/SC2 - 2708245
- Produttore:
- PHOENIX CONTACT
D-SUB connector, 9-pos., male connector, cable entry < 35°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks
Features
Termination resistor can be connected
Screw connection
Cable entry under 35°
Change to the D-SUB orientation through a reversible connection block
Metal housing for high level of immunity to interference at maximum transmission speed
Vibration and shock resistance according to EN 50155
Suitable for all common Fast Connect PROFIBUS cables and RS-485 bus lines
EAC
cULus Recognized
ATEX
CSA
UL Recognized
cUL Recognized
Specifications
Height | 39.4 mm |
---|---|
Length | 58 mm |
Strip Length | 5 mm |
Width | 16.6 mm |
Conformance/approvals | |
Designation | EAC |
Identification | EAC |
Designation | ATEX |
Identification | II 3 G Ex nA IIC T4 Gc X |
Additional text | Please follow the special installation instructions in the documentation! |
Designation | Corrosive gas test |
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Ambient conditions | |
Ambient temperature (operation) | -20 °C - 75 °C |
Ambient temperature (storage/transport) | -25 °C - 80 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Degree of protection | IP40 |
Environmental Product Compliance | |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Standards and Regulations | |
Free from substances that could impair the application of coating | according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard |
Connection in acc. with standard | CUL |
Dimensions | |
Max. cable diameter | 8.4 mm |
Min. cable diameter | 7.6 mm |
Width | 16.6 mm |
Height | 39.4 mm |
Length | 58 mm |
Connection data | |
Connection | D-SUB connection |
Number of positions | 9 |
Connection method | D-SUB connector |
Termination resistor | 390 Ω |
Termination resistor | 220 Ω |
Termination resistor | 390 Ω (Can be connected externally) |
Connection | PCB connection |
Connection method | Screw connection |
Conductor cross section flexible min. | 0.14 mm² |
Conductor cross section flexible max. | 1 mm² |
Conductor cross section solid min. | 0.14 mm² |
Conductor cross section solid max. | 1.5 mm² |
Min. AWG conductor cross section, flexible | 26 |
Max. AWG conductor cross section, flexible | 18 |
Conductor cross section AWG min. | 26 |
Conductor cross section AWG max. | 16 |
Stripping length | 5 mm |
Tightening torque | 0.4 Nm |
Connection | Programming connection |
Connection method | D-SUB socket |