D-SUB bus connector - SUBCON-PLUS-CAN/SC2 - 2708999
- Produttore:
- PHOENIX CONTACT
D-SUB plug, 9-pos. socket, two cable entries less than 35° to two terminal block rows, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2,3,7,9; screw connection terminal blocks
Features
Separate terminal blocks for bus cables
Segment-by-segment startup
High level of EMC
Flexibility in terms of cable entry selection
High transmission speed
Assembly under field conditions
Suitable for bus cables according to CiA Draft Recommendation 303-1 with an outside diameter of 8 mm
Termination resistor can be connected
Change to the D-SUB orientation through a reversible connection block
EAC
cULus Recognized
ATEX
CSA
UL Recognized
cUL Recognized
Specifications
Height | 39.4 mm |
---|---|
Length | 58 mm |
Strip Length | 5 mm |
Width | 16.6 mm |
Conformance/approvals | |
Designation | EAC |
Identification | EAC |
Designation | ATEX |
Identification | II 3 G Ex nA IIC T4 Gc X |
Additional text | Please follow the special installation instructions in the documentation! |
Designation | Corrosive gas test |
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Ambient conditions | |
Ambient temperature (operation) | -20 °C - 75 °C |
Ambient temperature (storage/transport) | -25 °C - 80 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Degree of protection | IP40 |
Environmental Product Compliance | |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Standards and Regulations | |
Free from substances that could impair the application of coating | according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard |
Connection in acc. with standard | CUL |
Dimensions | |
Max. cable diameter | 8.4 mm |
Min. cable diameter | 7.6 mm |
Width | 16.6 mm |
Height | 39.4 mm |
Length | 58 mm |
Connection data | |
Connection | D-SUB connection |
Number of positions | 9 |
Connection method | D-SUB socket |
Termination resistor | 120 Ω (Can be connected externally) |
Connection | PCB connection |
Connection method | Screw connection |
Conductor cross section flexible min. | 0.14 mm² |
Conductor cross section flexible max. | 1 mm² |
Conductor cross section solid min. | 0.14 mm² |
Conductor cross section solid max. | 1.5 mm² |
Min. AWG conductor cross section, flexible | 26 |
Max. AWG conductor cross section, flexible | 18 |
Conductor cross section AWG min. | 26 |
Conductor cross section AWG max. | 16 |
Stripping length | 5 mm |
Tightening torque | 0.4 Nm |