Inline terminal - IB IL 24 DO 2-2A-PAC - 2861263
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 70.73
- Codice Nuova Elva
- 2861263
- Codice produttore
- 2861263
- Disponibilità
- Invia RdO
Inline, Digital output terminal, Digital outputs: 2, 24 V DC, 2 A, connection method: 4-wire, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
Features
2 digital outputs
Connection of actuators in 2, 3, and 4-wire technology
Nominal current per output: 2 A
Total current of the terminal: 4 A
Short-circuit-proof and overload-protected outputs
Approved for use in a safety-related segment circuit
cULus Listed
EAC
ATEX
UL Listed
cUL Listed
UL Recognized
Specifications
| Depth | 71.5 mm |
|---|---|
| Height | 119.8 mm |
| Output Voltage | 24 V |
| Width | 12.2 mm |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions | |
| Width | 12.2 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
| Note on dimensions | Housing dimensions |
Interfaces | |
| Designation | Inline local bus |
| No. of channels | 2 |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps |
Digital outputs | |
| Output name | Digital outputs |
| Connection method | Spring-cage connection |
| Connection technology | 4-wire |
| Number of outputs | 2 |
| Protective circuit | Overload protection, short-circuit protection of outputs |
| Output voltage | 24 V DC (US - 1 V) |
| Nominal output voltage | 24 V DC |
| Maximum output current per channel | 2 A |
| Maximum output current per module | 4 A |
| Nominal load, inductive | 48 VA (1,2 H, 12 Ω) |
| Nominal load, lamp | 48 W |
| Nominal load, ohmic | 48 W (12 Ω) |
| Limitation of the voltage induced on circuit interruption | approx. -0.7 V |
| Behavior with overload | Auto restart |
| Behavior with inductive overload | Output can be destroyed |
| Reverse voltage resistance to short pulses | Reverse voltage proof |
Ambient conditions | |
| Permissible humidity (storage/transport) | 10 % - 95 % (non-condensing) |
| Air pressure (operation) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
| Air pressure (operation) | 80 kPa - 106 kPa (up to 3000 m above sea level, in ATEX Zone 2) |
| Air pressure (storage/transport) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C - 55 °C |
| Ambient temperature (storage/transport) | -25 °C - 85 °C |
| Permissible humidity (operation) | 10 % - 95 % (non-condensing) |
Inline potentials | |
| Designation | Communications power (UL) |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Current consumption | max. 35 mA |
| Power consumption | max. 0.27 W |
| Designation | Segment circuit supply (US) |
| Supply voltage | 24 V DC (via voltage jumper) |
| Supply voltage range | 19.2 V DC - 30 V DC (including all tolerances, including ripple) |
| Current consumption | max. 4 A |
| Current consumption | 0 A (without actuators) |
Standards and Regulations | |
| Connection in acc. with standard | CUL |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Electrical isolation | |
| Test section | 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. |
| Test section | 7.5 V supply (bus logics) / functional earth ground 500 V AC 50 Hz 1 min. |
Note | |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
