Power supply unit 2866747
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 183.56
- Codice Nuova Elva
- 2866747
- Codice produttore
- 2866747
- Disponibilità
- Invia RdO
Primary-switched QUINT POWER power supply for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 1-phase, output: 24 V DC/3.5 A
Features
Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently
Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal current for 12 ms
For superior system availability
Preventive function monitoring
cULus Listed
cULus Listed
SEMI F47
EAC
cULus Recognized
EAC
LR
RINA
NK
DeviceNet
DNV GL
IECEE CB Scheme
ABS
CSA
UL Listed
cUL Listed
UL Listed
cUL Listed
UL Recognized
cUL Recognized
BV
Specifications
| Height | 130 mm |
|---|---|
| Operating Temperature | -25 °C |
| Protection Rating | IP20 |
| Width | 32 mm |
Output data | |
| Nominal output voltage | 24 V DC ±1 % |
| Setting range of the output voltage (U<sub>Set</sub>) | 18 V DC - 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (I<sub>N</sub>) | 3.5 A (-25 °C - 60 °C, UOUT = 24 V DC) |
| POWER BOOST (I<sub>Boost</sub>) | 4 A (-25°C - 40°C permanent, UOUT = 24 V DC ) |
| Selective Fuse Breaking (I<sub>SFB</sub>) | 15 A (12 ms) |
| Derating | 60 °C - 70 °C (2.5%/K) |
| Connection in parallel | Yes, for redundancy and increased capacity |
| Connection in series | yes |
| Feedback resistance | max. 35 V DC |
| Protection against surge voltage on the output | < 35 V DC |
| Control deviation | < 1 % (change in load, static 10 % - 90 %) |
| Control deviation | < 2 % (change in load, dynamic 10 % - 90 %) |
| Control deviation | < 0.1 % (change in input voltage ±10 %) |
| Residual ripple | < 50 mVPP (with nominal values) |
| Output power | 84 W |
| Typical response time | < 0.05 s |
| Maximum power dissipation in no-load condition | 3.5 W |
| Power loss nominal load max. | 11 W |
Standards and Regulations | |
| Frequency range | 1.4 GHz - 2 GHz |
| Test field strength | 3 V/m (Test Level 2) |
| Standards/regulations | EN 61000-4-4 |
| Comments | Criterion B |
| Standards/regulations | EN 61000-6-3 |
| Standards/regulations | EN 61000-4-6 |
| Frequency range | 0.15 MHz - 80 MHz |
| Voltage | 10 V (Test Level 3) |
| Low Voltage Directive | Conformance with LV directive 2006/95/EC |
| Standard - Electrical safety | IEC 60950-1/VDE 0805 (SELV) |
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
| Standard – Safety extra-low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
| Standard - Safe isolation | DIN VDE 0100-410 |
| Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment | EN 50178 |
| Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
| Standard - Equipment safety | BG (design tested) |
| Standard - Approval for medical use | IEC 60601-1, 2 x MOOP |
| Shipbuilding approval | DNV GL (EMC A), ABS, LR, RINA, NK, BV |
| UL approvals | UL Listed UL 508 |
| UL approvals | UL/C-UL Recognized UL 60950-1 |
| UL approvals | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
| DeviceNet approval | DeviceNet™ Power Supply Conformance Tested |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| Vibration (operation) | 15 Hz - 150 Hz, 2.3g, 90 min. |
| Approval - requirement of the semiconductor industry with regard to mains voltage dips | SEMI F47-0706 Compliance Certificate |
| Information technology equipment - safety (CB scheme) | CB Scheme |
| Rail applications | EN 50121-4 |
| Overvoltage category (EN 62477-1) | III |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Noise emission | EN 55011 (EN 55022) |
| Noise immunity | EN 61000-6-2:2005 |
| Connection in acc. with standard | CSA |
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | 4 kV (Test Level 2) |
| Standards/regulations | EN 61000-4-3 |
| Frequency range | 80 MHz - 1 GHz |
| Test field strength | 10 V/m (Test Level 3) |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 25; |
| China RoHS | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Dimensions | |
| Width | 32 mm |
| Height | 130 mm |
| Depth | 125 mm |
| Width with alternative assembly | 122 mm |
| Height with alternative assembly | 130 mm |
| Depth with alternative assembly | 35 mm |
Input data | |
| Nominal input voltage range | 100 V AC - 240 V AC |
| Input voltage range | 85 V AC - 264 V AC |
| Input voltage range | 90 V DC - 350 V DC |
| Dielectric strength maximum | 300 V AC |
| AC frequency range | 45 Hz - 65 Hz |
| Frequency range DC | 0 Hz |
| Discharge current to PE | < 3.5 mA |
| Current consumption | 1.4 A (120 V AC) |
| Current consumption | 0.8 A (230 V AC) |
| Current consumption | 0.9 A (110 V DC) |
| Current consumption | 0.4 A (220 V DC) |
| Nominal power consumption | 180 VA |
| Inrush surge current | < 20 A (typical) |
| Mains buffering | typ. 20 ms (120 V AC) |
| Mains buffering | typ. 80 ms (230 V AC) |
| Input fuse | 5 A (slow-blow, internal) |
| Choice of suitable circuit breakers | 6 A - 20 A (AC: Characteristics B, C, D, K) |
| Type of protection | Transient surge protection |
| Protective circuit/component | Varistor |
Connection data, input | |
| Connection method | Pluggable screw connection |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 20 |
| Conductor cross section AWG max. | 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Connection data, output | |
| Connection method | Pluggable screw connection |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 20 |
| Conductor cross section AWG max. | 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Ambient conditions | |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Degree of pollution | 2 |
| Installation height | 5000 m |
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C - 70 °C (> 60 °C Derating: 2.5 %/K) |
| Ambient temperature (storage/transport) | -40 °C - 85 °C |
Connection data for signaling | |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section AWG min. | 20 |
| Conductor cross section AWG max. | 12 |
| Screw thread | M3 |
