Relay Module - PLC-RSC- 24UC/21-21AU - 2967112
- Produttore:
- PHOENIX CONTACT
PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC/DC
Features
Slim design
Efficient connection to system cabling using V8 adapter
Safe isolation according to DIN EN 50178 between coil and contact
RT III sealed relay
Functional plug-in bridges
Integrated input circuit and interference suppression circuit
cULus Listed
RC FRT
cULus Recognized
EAC
PRS
DNV GL
UL Listed
cUL Listed
UL Recognized
cUL Recognized
Specifications
Depth | 94 mm |
---|---|
Height | 80 mm |
Strip Length | 8 mm |
Width | 14 mm |
Contact side (with destroyed gold layer) | |
Note | the following values are applicable if a gold layer is destroyed |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V AC/DC |
Limiting continuous current | 6 A |
Maximum inrush current | 15 A (300 ms) |
Min. switching current | 10 mA |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 85 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 60 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 44 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 60 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
Switching capacity | 2 A (at 24 V, DC13) |
Switching capacity | 0.2 A (at 110 V, DC13) |
Switching capacity | 0.2 A (at 250 V, DC13) |
Switching capacity | 2 A (at 24 V, AC15) |
Switching capacity | 2 A (at 120 V, AC15) |
Switching capacity | 2 A (at 250 V, AC15) |
Environmental Product Compliance | |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions | |
Width | 14 mm |
Height | 80 mm |
Depth | 94 mm |
Connection data | |
Connection name | Coil side |
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.2 mm² - 2.5 mm² (Single ferrule) |
Conductor cross section flexible | 2x 0.5 mm² - 1.5 mm² (TWIN ferrule) |
Conductor cross section AWG | 26 - 14 |
Contact side | |
Contact type | 2 PDT |
Type of switch contact | Single contact |
Contact material | AgNi, hard gold-plated |
Maximum switching voltage | 30 V AC |
Maximum switching voltage | 36 V DC |
Minimum switching voltage | 100 mV (at 10 mA) |
Min. switching current | 1 mA (at 24 V) |
Maximum inrush current | 50 mA |
Limiting continuous current | 50 mA |
Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
Connection data 2 | |
Connection name | Contact side |
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.2 mm² - 2.5 mm² (Single ferrule) |
Conductor cross section flexible | 2x 0.5 mm² - 1.5 mm² (TWIN ferrule) |
Conductor cross section AWG | 26 - 14 |
Coil side | |
Typical input current at UN | 17.5 mA (at UN = 24 V AC) |
Typical input current at UN | 17.5 mA (at UN = 24 V DC) |
Typical response time | 8 ms |
Typical release time | 10 ms |
Protective circuit | Bridge rectifier Bridge rectifier |
Operating voltage display | Yellow LED |
Power dissipation for nominal condition | 0.42 W |
Nominal input voltage UN | 24 V AC/DC |
Standards and Regulations | |
Connection in acc. with standard | CUL |
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
Standards/regulations | EN 50178 |
Rated surge voltage | 6 kV |
Insulation | Basic insulation |
Pollution degree | 2 |
Overvoltage category | III |
Ambient conditions | |
Ambient temperature (operation) | -40 °C - 60 °C |
Ambient temperature (storage/transport) | -40 °C - 85 °C |
Degree of protection | RT III (Relay) |
Degree of protection | IP20 (Relay base) |
Note | |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |