brushless DC motor, Lexium ILA ILE ILS, 24..36 V, CANopen DS301 interface, L = 174mm, 54:1
- Produttore:
- Schneider Electric
- Codice Nuova Elva
- ILE1F661PB1A6
- Codice produttore
- ILE1F661PB1A6
- Disponibilità
- Invia RdO
Specifications
| Certifications | CUL |
|---|---|
| Current | 5500 mA |
| Length | 229 mm |
| Mounting Hole Size | 4.4 mm |
| Net Weight | 2.3 kg |
| Number of Holes | 2 |
| Number of Phases | 1 |
| Number of Poles | 6 |
| Standard | EN 50347 |
| Storage Temperature | -25-70 °C |
| Warranty Length | 18 months |
Specifications | |
| Range Of Product | Lexium integrated drive |
| [Us] Rated Supply Voltage | 36 V || 24 V |
| Communication Interface | CANopen DS301, Integrated |
| Gear Box Type | worm gear, 3 stages |
| Motor Type | brushless DC motor |
| Nominal Speed | 75 rpm 24 V || 75 rpm 36 V |
| Electrical Connection | printed circuit board connector |
| Nominal Torque | 5.8 N.m 24 V || 6 N.m 36 V |
| Device Short Name | ILE |
| Reduction Ratio | 54:1 (1715:32) |
| Network Type | DC |
| Winding Type | medium speed of rotation and medium torque |
| Number Of Motor Poles | 6 |
| Holding Brake | without |
| Product Or Component Type | motion integrated drive |
| Phase | single phase |
| Length | 229 mm |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | 7000 mA peak || 5500 mA maximum continuous |
| Second Shaft | without second shaft end |
| Marking | CE |
| Net Weight | 2.3 kg |
| Voltage State 0 Guaranteed | -3...4.5 V |
| Centring Collar Diameter | 36 mm |
| Motor Flange Size | 66 mm |
| Maximum Torsional Backlash | 1 ° |
| Peak Stall Torque | 11.66 N.m 36 V || 8.42 N.m 24 V |
| Number Of Mounting Holes | 2 |
| Nominal Output Power | 45 W 24 V || 47 W 36 V |
| Maximum Mechanical Speed | 93 rpm |
| Discrete Output Voltage | 23...25 V |
| Supply Voltage Limits | 18-40 V |
| Mounting Holes Diameter | 4.4 mm |
| Speed Feedback Resolution | 12 points/turn motor || 0.56° gearbox output |
| Maximum Supply Current | 0.1 A power stage disabled) || 6.8 A 24 V || 3.8 A 36 V |
| Detent Torque | 6.5 N.m |
| Type Of Cooling | natural convection |
| Service Life In Hours | 6000 h bearing |
| Shaft End | hole |
| Feedback Type | BLDC encoder |
| Maximum Switching Current | 100 mA per output || 200 mA total |
| Protection Type | safe torque off || overload of output voltage || short circuit of the output voltage |
| Transmission Rate | 50, 100, 125, 250, 500, 800 and 1000 kbauds |
| Accuracy Error | +/- 1 point |
| Input/Output Type | 4 signals (each be used as input or output) |
| Maximum Axial Force Fa | 80 N |
| Associated Fuse Rating | 10 A |
| Voltage State 1 Guaranteed | 15...30 V |
| Maximum Radial Force Fr | 200 N |
| Mounting Support | flange |
| Number Of Motor Stacks | 1 |
| Rotor Inertia | 430 kg.cm² |
| Continuous Stall Torque | 7.9 N.m |
| Discrete Input Current | 10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Circularity Profile | ENVEOLI1411012EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP1411012EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
Environment | |
| Product Certifications | cUL || UL || TÜV |
| Operating Altitude | <= 3280.84 ft (1000 m) without derating |
| Standards | EN/IEC 61800-3 || EN/IEC 50178 || EN 61800-3:2001, second environment || EN 61800-3 : 2001-02 || IEC 61800-3, Ed 2 || EN 50347 || IEC 60072-1 |
| Ambient Air Temperature For Operation | 50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating) |
| Shock Resistance | 150 m/s² 1000 shocks EN/IEC 60068-2-29 |
| Vibration Resistance | 20 m/s² 10-500 Hz) 10 cycles EN/IEC 60068-2-6 |
| Permissible Ambient Air Temperature Around The Device | 105 °C power amplifier || 110 °C motor |
| Ambient Air Temperature For Storage | -25-70 °C |
| Relative Humidity | 15-85 % without condensation |
| Ip Degree Of Protection | shaft bushing IP41 EN/IEC 60034-5 || total except shaft bushing IP54 EN/IEC 60034-5 |
