Power plug in relay, Harmony, 15A, 1CO, lockable test button, 48V AC
- Produttore:
- Schneider Electric
This Harmony RPM power plug-in relay has a coil control voltage of 48V AC and has 1 changeover contact SPDT (single pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Specifications
Certifications | CSA |
---|---|
Contact Material | Silver Alloy |
Net Weight | 0.026 kg |
Operating Cycles | 1200 |
Standard | CSA C22.2 No 14 |
Storage Temperature | -40-85 °C |
Warranty Length | 18 months |
Specifications | |
Utilisation Coefficient | 20 % |
[Ithe] Conventional Enclosed Thermal Current | 15 A -40-55 °C |
[Uc] Control Circuit Voltage | 48 V AC 50/60 Hz |
Range Of Product | Harmony Electromechanical Relays |
Product Or Component Type | plug-in relay |
Status Led | without |
Control Type | lockable test button |
Series Name | Power |
Contacts Type And Composition | 1 C/O |
Device Short Name | RPM |
Contractual warranty | |
Warranty | 18 months |
Complementary | |
Maximum Switching Capacity | 3750 VA || 420 W |
Reset Time | 20 ms at nominal voltage |
Net Weight | 0.026 kg |
Maximum Switching Voltage | 250 V IEC |
Average Resistance | 708 Ohm at 20 °C +/- 15 % |
Device Presentation | complete product |
Rated Operational Voltage Limits | 38.4...52.8 V AC |
Pollution Degree | 3 |
[Ie] Rated Operational Current | 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC |
[Ui] Rated Insulation Voltage | 250 V IEC || 300 V CSA || 300 V UL |
Mechanical Durability | 10000000 cycles |
Safety Reliability Data | B10d = 100000 |
Operating Position | any position |
Operating Time | 20 ms at nominal voltage |
Load Current | 15 A 250 V AC || 15 A 28 V DC |
Drop-Out Voltage Threshold | >= 0.15 Uc AC |
[Uimp] Rated Impulse Withstand Voltage | 4 kV 1.2/50 µs |
Minimum Switching Capacity | 170 mW 10 mA, 17 V |
Operating Rate | <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load |
Protection Category | RT I |
Test Levels | level A |
Electrical Durability | 100000 cycles resistive |
Contacts Material | AgNi |
Average Coil Consumption In Va | 1.6 60 Hz |
Shape Of Pin | flat |
Offer Sustainability | |
Rohs Exemption Information | Yes |
China Rohs Regulation | X |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1406038EN |
Sustainable Offer Status | Green Premium product |
Toxic Heavy Metal Free | Yes |
Reach Regulation | Free of Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Reach Free Of Svhc | Yes |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Environment | |
Product Certifications | UL || CSA || EAC |
Standards | CSA C22.2 No 14 || UL 508 || EN/IEC 61810-1 |
Ambient Air Temperature For Operation | -40-55 °C |
Dielectric Strength | 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced |
Vibration Resistance | 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating |
Shock Resistance | 15 gnin operation || 30 gnnot operating |
Ip Degree Of Protection | IP40 conforming to EN/IEC 60529 |
Ambient Air Temperature For Storage | -40-85 °C |