Photoelectric sensors XU, XUD, M8, PVC, PNP, discrete solid state
- Produttore:
- Schneider Electric
- Prezzo (IVA esclusa)
- € 118.94
- Codice Nuova Elva
- XUDA1PSMM8
- Codice produttore
- XUDA1PSMM8
- Disponibilità
- Invia RdO
This product is part of the XU range, an offer of photoelectric sensors. This photoelectric sensor in fibre design. It has a 1 normally opened or 1 normally closed programmable discrete type of output. It is furnished with 4-pin M8 male connector for electrical connection. It is an IP64 and IP65 rated product. It is a photoelectric sensor with a rated supply voltage of 12V to 24V DC with reverse polarity protection, a no-load current consumption of ≤50mA and a switching frequency of ≤1Hz. This sensor has red emission and 2 LEDs. The enclosure is made of PBT with PMMA lens. Its dimensions are 40mm (Width) x 10mm (Depth) x 65mm (Height) and weighs 0.04kg. It is ideal for material handling, packaging, labelling, assembly, lift, escalators or food and beverage industries. This product is certified by CE and CULus.
Specifications
| Certifications | CE |
|---|---|
| Current | 50 mA |
| Depth | 10 mm |
| Enclosure Material | PBT |
| Height | 65 mm |
| Net Weight | 0.04 kg |
| Storage Temperature | -30-70 °C |
| Warranty Length | 18 months |
| Width | 40 mm |
Specifications | |
| Range Of Product | Telemecanique Photoelectric sensors XU |
| Sensor Name | XUD |
| Series Name | Application assembly |
| Specific Application Of Photoelectric Detector | object |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Current Consumption | <= 50 mA no-load |
| Setting-Up | sensitivity adjustment with teach mode |
| Lens Material | PMMA |
| Maximum Voltage Drop | <2 V closed) |
| Net Weight | 0.04 kg |
| Wiring Technique | 3-wire |
| Maximum Delay Recovery | 0.5 ms |
| Maximum Delay First Up | 120 ms |
| Supply Voltage Limits | 10.8-26.4 V DC |
| Cable Material | PVC |
| Switching Capacity In Ma | <= 100 mA overload protection) || <= 100 mA short-circuit protection) |
| Electrical Connection | 1 male connector M8, 4 pins |
| Sensor Design | fiber design |
| Enclosure Material | PBT |
| Supply Circuit Type | DC |
| Electronic Sensor Type | photo-electric sensor |
| Width | 40 mm |
| Output Type | solid state |
| Depth | 10 mm |
| Product Compatibility | glass or plastic fibre optics 1 mm or 2.2 mm |
| Add On Output | without |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Discrete Output Type | PNP |
| Discrete Output Function | 1 NO or 1 NC programmable |
| Height | 65 mm |
| Switching Frequency | <= 1 kHz |
| Maximum Delay Response | 0.5 ms |
| Type Of Output Signal | discrete |
| Status Led | instability 1 LED red) || output state 1 LED yellow) |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Toxic Heavy Metal Free | Yes |
| Reach Regulation | Free of Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Reach Free Of Svhc | Yes |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Environment | |
| Product Certifications | cULus || CE |
| Ambient Air Temperature For Operation | -10-55 °C |
| Ip Degree Of Protection | IP64 optic fiber Ø 1 mm IEC 529 || IP65 optic fiber Ø 2 mm IEC 529 |
| Shock Resistance | 30 gn 11 ms) IEC 60068-2-27 |
| Vibration Resistance | +/-0.5 mm 10-55 Hz)IEC 60068-2-6 || 7 gn 10-55 Hz)IEC 60068-2-6 |
| Emission | red |
| Ambient Air Temperature For Storage | -30-70 °C |
| Interference Protection | without |
