PRO ECO 960W 24V 40A
- Produttore:
- WEIDMULLER
- Prezzo (IVA esclusa)
- € 230.40
- Codice Nuova Elva
- 1469520000
- Codice produttore
- 1469520000
- Disponibilità
- Invia RdO
Power supply, switch-mode power supply unit, 24 V
Specifications
| Depth | 120 mm |
|---|---|
| Height | 125 mm |
| IP Rating | IP20 |
| Max. Operating Temperature | 70 °C |
| Min. Operating Temperature | -25 °C |
| Net Weight | 3,190 g |
| Operating Temperature | -25 °C...70 °C |
| Storage Temperature | -40 °C...85 °C |
| Width | 160 mm |
Dimensions And Weights | |
| Width | 160 mm |
| Width (inches) | 6.299 inch |
| Height | 125 mm |
| Height (inches) | 4.921 inch |
| Depth | 120 mm |
| Depth (inches) | 4.724 inch |
| Net weight | 3,190 g |
Temperatures | |
| Operating temperature, max. | 70 °C |
| Operating temperature, min. | -25 °C |
| Storage temperature, max. | 85 °C |
| Storage temperature, min. | -40 °C |
| Operating temperature | -25 °C...70 °C |
| Storage temperature | -40 °C...85 °C |
Environmental Product Compliance | |
| REACH SVHC | Lead 7439-92-1 |
Input | |
| AC current consumption | 4,6 A @ 230 V AC / 9,9 A @ 110 V AC |
| Rated input voltage | 100...240 V AC (wide-range input) |
| Recommended back-up fuse | 16 A / DI, safety fuse20 A, Char. B, circuit breaker16 A, Char. C, circuit breaker |
| Surge protection | Varistor |
| AC input voltage range | 85...264 V AC (derating at 100 V AC) |
| Connection system | Screw connection |
| DC current consumption | 2,9 A @ 370 V DC / 9 A @ 120 V DC |
| DC input voltage range | 80...370 V DC (Derating @ 120 V DC) |
| Frequency range AC | 47...63 Hz |
| Input frequency | 47...63 Hz |
| Input fuse (internal) | Yes |
| Inrush current | max. 5 A |
Output | |
| Capacitive load | unrestricted |
| Ramp-up time | ≤ 100 ms |
| Rated output voltage | 24 V DC ± 1 % |
| Residual ripple, breaking spikes | < 50 mVPP @ 24 V DC, IN |
| Connection system | Screw connection |
| Continous output current @ U | 40 A @ 50 °C, 24 A @ 70 °C |
| Nominal output current for U | 40 A @ 50 °C |
| Output power | 960 W |
| Output voltage | 22...28 V (adjustable via potentiometer) |
| Overload protection | Yes |
| Parallel connection option | yes, max. 3 |
| Protection against inverse voltage | Yes |
General Data | |
| AC failure bridging time @ I | > 20 ms @ 230 V AC / > 20 ms @ 115 V AC |
| Power factor (approx.) | > 0.98…230 V AC / > 0.98…115 V AC |
| Power loss, idling | 8 W |
| Power loss, nominal load | 85 W |
| Protection against over-heating | Yes |
| Protection against reverse voltages from the load | 30…35 V DC |
| Protection degree | IP20 |
| Short-circuit protection | Yes |
| Degree of efficiency | 93% |
| Earth leakage current, max. | 3.5 mA |
| Housing version | Metal, corrosion resistant |
| Indication | Green LED (Uoutput > 21.6 V DC), Yellow LED (loutput > 90 % IRated typ. ), red LED (overload, overtemperature, short-circuit, Uoutput < 20.4 V DC) |
| MTBF | > 500,000 h in accordance with IEC 61709 (SN29500) |
| Max. perm. air humidity (operational) | 5 %…95 % RH |
| Mounting position, installation notice | on terminal rail TS 35 |
| Operating temperature | -25 °C...70 °C |
Emc / Shock / Vibration | |
| Limiting of mains voltage harmonic currents | According to EN 61000-3-2 |
| Noise emission in accordance with EN55032 | Class B |
| Vibration resistance IEC 60068-2-6 | 1 g according to EN 50178 |
| Interference immunity test acc. to | EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (burst), EN 61000-4-5 (surge), EN 61000-4-6 (conducted), EN61000-4-8 (Fields), EN61000-4-11 (Dips) |
| Shock resistance IEC 60068-2-27 | 15 g In all directions |
Insulation Coordination | |
| Insulation voltage input / earth | 2 kV |
| Insulation voltage output / earth | 0.5 kV |
| Insulation voltage, input/output | 3 kV |
| Pollution severity | 2 |
| Protection class | I, with PE connection |
Electrical Safety (Applied Standards) | |
| Electrical machine equipment | Acc. to EN60204 |
| For use with electronic equipment | Acc. to EN50178 / VDE0160 |
| Protection against dangerous shock currents | Acc. to VDE0106-101 |
| Protective separation / protection against electrical shock | VDE0100-410 / acc. to DIN57100-410 |
| Safety extra-low voltage | SELV according to EN 60950, PELV according to EN 60204 |
| Safety transformers for switch-mode power supplies | According to EN 61558-2-16 |
Connection Data (Input) | |
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Wire connection cross section, flexible (input), max. | 2.5 mm² |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , min. | 0.5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Connection system | Screw connection |
| Number of terminals | 3 for L/N/PE |
| Tightening torque, max. | 0.6 Nm |
| Tightening torque, min. | 0.5 Nm |
Connection Data (Output) | |
| Conductor cross-section, AWG/kcmil , max. | 8 |
| Tightening torque, min. | 0.5 Nm |
| Conductor cross-section, AWG/kcmil , min. | 22 |
| Conductor cross-section, flexible , max. | 10 mm² |
| Conductor cross-section, flexible , min. | 2.5 mm² |
| Conductor cross-section, rigid , max. | 16 mm² |
| Conductor cross-section, rigid , min. | 0.5 mm² |
| Connection system | Screw connection |
| Number of terminals | 7 (++,---,13,14) |
| Tightening torque, max. | 0.6 Nm |
Signalling | |
| Contact load (NO contact) | max. 30 V DC / 1 A |
| Floating contact | Yes |
| Relay on/off | Output voltage >21.6 V DC/ <20.4 V DC, overload |
Approvals | |
| Approvals | CE, CULUS, EAC, TUEV |
| ROHS | Conform |
| UL File Number Search | E258476 |
Ratings Iecex/Atex/Cul | |
| Certificate no. (cULus) | E258476 |
Classifications | |
| ETIM 6.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| eClass 9.0 | 27-04-07-01 |
| eClass 9.1 | 27-04-07-01 |
| eClass 10.0 | 27-04-07-01 |
