1. Store
  2. PHOENIX CONTACT
  3. 2866789

Power supply unit - QUINT-PS/1AC/24DC/40 - 2866789

Manufactured by:
PHOENIX CONTACT
Phoenix contact
Daecfc930a13250ef7df7181ae0f90d887d8fc13 medium
  • Daecfc930a13250ef7df7181ae0f90d887d8fc13 thumb
Price (VAT excluded)
€ 810.14
Nuova Elva code
2866789
Manufacturer code
2866789
Availability
Send request for quotation

Primary-switched QUINT POWER power supply for DIN rail mounting with SFB (Selective Fuse Breaking) Technology, input: 1-phase, output: 24 V DC/40 A

Features

  • For superior system availability

  • Fast tripping of standard circuit breakers with dynamic power reserve SFB (selective fuse breaking) technology with up to 6 times the nominal current for 12 ms

  • Reliable starting of difficult loads with the static POWER BOOST power reserve with up to 1.5 times the nominal current permanently

  • Preventive function monitoring

  • BV

  • cULus Listed

  • SEMI F47

  • EAC

  • cULus Recognized

  • LR

  • RINA

  • NK

  • IECEE CB Scheme

  • DNV GL

  • ABS

  • CSA

  • UL Listed

  • cUL Listed

  • UL Recognized

  • cUL Recognized

Specifications

Depth125 mm
Height130 mm
Output Voltage24 V
Strip Length10 mm
Voltage10 V
Width180 mm

Ambient conditions

Ambient temperature (operation)-25 °C - 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (start-up type tested)-40 °C
Ambient temperature (storage/transport)-40 °C - 85 °C
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Climatic class3K3 (in acc. with EN 60721)
Degree of pollution2
Installation height4000 m
Degree of protectionIP20

Output data

Nominal output voltage24 V DC ±1 %
Setting range of the output voltage (USet)18 V DC - 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)40 A (-25 °C - 60 °C, UOUT = 24 V DC)
POWER BOOST (IBoost)45 A (-25°C - 40°C permanent, UOUT = 24 V DC )
Selective Fuse Breaking (ISFB)215 A (12 ms)
Derating60 °C - 70 °C (2.5%/K)
Connection in parallelYes, for redundancy and increased capacity
Connection in seriesyes
Feedback voltage resistancemax. 35 V DC
Protection against overvoltage at the output (OVP)< 35 V DC
Residual ripple< 30 mVPP (with nominal values)
Output power960 W
Typical response time< 0.7 s
Maximum power dissipation in no-load condition14 W
Power loss nominal load max.80 W

Conformance/approvals

UL approvalsUL Listed UL 508
UL approvalsUL/C-UL Recognized UL 60950-1
UL approvalsUL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
CSACSA-C22.2 No. 107.1-01
Shipbuilding approvalDNV GL (EMC A), ABS, LR, RINA, NK, BV

Standards

Standard - Safe isolationDIN VDE 0100-410
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178
Standard – Limitation of mains harmonic currentsEN 61000-3-2
Standard - Equipment safetyBG (design tested)
Rail applicationsEN 50121-4
EMC requirements for noise immunityEN 61000-6-1
EMC requirements for noise immunityEN 61000-6-2
EMC requirements for noise emissionEN 61000-6-3
EMC requirements for noise emissionEN 61000-6-4
Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)
Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60204-1 (PELV)

Environmental Product Compliance

REACh SVHCLead 7439-92-1
China RoHSEnvironmentally Friendly Use Period = 25;
China RoHSFor details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Dimensions

Width180 mm
Height130 mm
Depth125 mm
Width with alternative assembly122 mm
Height with alternative assembly130 mm
Depth with alternative assembly183 mm
Installation distance right/left5 mm / 5 mm
Installation distance top/bottom50 mm / 50 mm

EMC data

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC
Electrostatic dischargeEN 61000-4-2
Contact discharge8 kV (Test Level 4)
Discharge in air15 kV (Test Level 4)
Electromagnetic HF fieldEN 61000-4-3
Frequency range80 MHz - 1 GHz
Test field strength20 V/m (Test Level 3)
Frequency range1 GHz - 2 GHz
Test field strength10 V/m (Test Level 3)
Frequency range2 GHz - 3 GHz
CommentsCriterion A
Fast transients (burst)EN 61000-4-4
Input4 kV (Test Level 4 - asymmetrical)
Output2 kV (Test Level 3 - asymmetrical)
Signal2 kV (Test Level 4 - asymmetrical)
Surge voltage load (surge)EN 61000-4-5
Input2 kV (Test Level 3 - symmetrical)
Output1 kV (Test Level 2 - symmetrical)
Signal1 kV (Test Level 2 - asymmetrical)
I/O/Sasymmetrical
Frequency range0.15 MHz - 80 MHz
Voltage10 V (Test Level 3)
Wireless telephone simulationENV 50204
Frequency900 MHz
Frequency1800 MHz
Field intensity20 V/m
Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

Input data

Nominal input voltage range100 V AC - 240 V AC
Nominal input voltage range120 V DC - 300 V DC (UL 508: ≤ 250 V DC)
Input voltage range85 V AC - 264 V AC
Input voltage range90 V DC - 300 V DC (UL 508: ≤ 250 V DC)
Dielectric strength maximum300 V AC
AC frequency range45 Hz - 65 Hz
Frequency range DC0 Hz
Discharge current to PE< 3.5 mA
Current consumption8.8 A (120 V AC)
Current consumption4.6 A (230 V AC)
Current consumption9.5 A (110 V DC)
Current consumption4.7 A (220 V DC)
Nominal power consumption1157 VA
Inrush current< 15 A (typical)
Mains buffering time> 35 ms (120 V AC)
Mains buffering time> 35 ms (230 V AC)
Input fuse20 A (slow-blow, internal)
Recommended breaker for input protection16 A - 20 A (AC: Characteristics B, C, D, K)
Power factor (cos phi)0.88
Type of protectionTransient surge protection
Protective circuit/componentVaristor, gas-filled surge arrester

Connection data, input

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.14
Conductor cross section AWG max.10
Stripping length7 mm
Screw threadM3

Connection data, output

Connection methodScrew connection
Conductor cross section solid min.0.5 mm²
Conductor cross section solid max.16 mm²
Conductor cross section flexible min.0.5 mm²
Conductor cross section flexible max.16 mm²
Conductor cross section AWG min.8
Conductor cross section AWG max.6
Stripping length10 mm
Screw threadM4

Connection data for signaling

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.10
Screw threadM3

Frequently bought together

Other PHOENIX CONTACT items

Request a quote