Thermocouple measuring transducer - MINI MCR-2-TC-UI - 2902055
- Manufactured by:
- PHOENIX CONTACT
- Price (VAT excluded)
- € 255.82
- Nuova Elva code
- 2902055
- Manufacturer code
- 2902055
- Availability
- Send request for quotation
Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Screw connection technology, standard configuration
Features
cULus Listed
ATEX
GL
UL Listed
cUL Listed
Specifications
| Depth | 119.2 mm |
|---|---|
| Height | 109.81 mm |
| Strip Length | 10 mm |
| Width | 6.2 mm |
Ambient conditions | |
| Ambient temperature (operation) | -40 °C - 70 °C |
| Ambient temperature (storage/transport) | -40 °C - 85 °C |
| Permissible humidity (operation) | 5 % - 95 % (non-condensing) |
| Degree of protection | IP20 (not assessed by UL) |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Input data | |
| Configurable/programmable | Yes |
| Sensor types that can be used (TC) | B, C, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L |
| Temperature measuring range | -250 °C - 2500 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 1350°C via DIP switches) |
Power supply | |
| Supply voltage range | 9.6 V DC - 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Typical current consumption | 32.7 mA (24 V DC) |
| Typical current consumption | 66.8 mA (12 V DC) |
| Power consumption | ≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load) |
Dimensions | |
| Width | 6.2 mm |
| Height | 109.81 mm |
| Depth | 119.2 mm |
Output data | |
| Number of outputs | 1 |
| Configurable/programmable | Yes |
| Voltage output signal | 0 V - 5 V (via DIP switch) |
| Voltage output signal | 1 V - 5 V (via DIP switch) |
| Voltage output signal | 0 V - 10 V (via DIP switch) |
| Voltage output signal | 10 V - 0 V (via DIP switch) |
| Voltage output signal | 0 V - 10.5 V (can be set via software) |
| Current output signal | 0 mA - 20 mA (via DIP switch) |
| Current output signal | 4 mA - 20 mA (via DIP switch) |
| Current output signal | 20 mA - 0 mA (via DIP switch) |
| Current output signal | 20 mA - 4 mA (via DIP switch) |
| Current output signal | 0 mA - 21 mA (can be set via software) |
| Max. output voltage | approx. 12.3 V |
| Max. output current | 24.6 mA |
| Short-circuit current | < 31.5 mA |
| Load/output load voltage output | ≥ 10 kΩ |
| Load/output load current output | ≤ 600 Ω (at 20 mA) |
| Ripple | < 10 mVrms |
| Ripple | < 10 mVrms (at 600 Ω) |
Connection data | |
| Connection method | Screw connection |
| Stripping length | 10 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² - 1.5 mm² (with ferrule) |
| Conductor cross section solid | 0.14 mm² - 2.5 mm² (without ferrule) |
| Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
| Conductor cross section AWG | 24 - 12 (flexible) |
| Torque | 0.5 Nm - 0.6 Nm |
EMC data | |
| Designation | Electromagnetic RF field |
| Standards/regulations | EN 61000-4-3 |
| Typical deviation from the measuring range final value | 0.06 % |
| Designation | Fast transients (burst) |
| Standards/regulations | EN 61000-4-4 |
| Typical deviation from the measuring range final value | 0.1 % |
| Designation | Conducted interferences |
| Standards/regulations | EN 61000-4-6 |
| Typical deviation from the measuring range final value | 0.05 % |
Standards and Regulations | |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
| Standards/regulations | EN 61000-4-2 |
| Designation | Electromagnetic RF field |
| Standards/regulations | EN 61000-4-3 |
| Standards/regulations | EN 61000-4-4 |
| Standards/regulations | EN 61000-4-5 |
| Designation | Conducted interferences |
| Standards/regulations | EN 61000-4-6 |
| Electrical isolation | Reinforced insulation in accordance with IEC 61010-1 |
| Conformance | CE-compliant |
| ATEX | II 3 G Ex nA IIC T4 Gc X |
| UL, USA/Canada | UL 508 Listed |
| UL, USA/Canada | Class I, Div. 2, Groups A, B, C, D T6 |
| UL, USA/Canada | Class I, Zone 2, Group IIC T6 |
Note | |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
