IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 2 NO and 2 NC, 24VDC coil, open style
- Manufactured by:
- Schneider Electric
- Nuova Elva code
- LC1D098BD
- Manufacturer code
- LC1D098BD
- Availability
- Send request for quotation
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Pressure wire connectors are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 1.16 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
Specifications
| Certifications | CB |
|---|---|
| Contact Configuration | 1 NO + 1 NC |
| Depth | 99 mm |
| Height | 85 mm |
| Impedance | 2.5 MOhm - Ith 25 A 50 Hz Power Circuit |
| Net Weight | 0.525 kg |
| Standard | CSA C22.2 No 60947-4-1 |
| Warranty Length | 18 months |
| Width | 45 mm |
Specifications | |
| [Uc] Control Circuit Voltage | 24 V DC |
| [Ue] Rated Operational Voltage | power circuit <= 690 V AC 25...400 Hz || power circuit <= 250 V DC |
| Range Of Product | TeSys Deca |
| Contactor Application | resistive load |
| Product Or Component Type | contactor |
| Utilisation Category | AC-1 || AC-3 || AC-3e || AC-4 |
| [Ie] Rated Operational Current | 20 A 60 °C) <= 440 V AC AC-1 power circuit |
| Poles Description | 4P |
| Device Short Name | LC1D |
Contractual warranty | |
| Warranty | 18 months |
Complementary | |
| Non-Overlap Time | 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact |
| Control Circuit Type | DC standard |
| Safety Reliability Level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Pollution Degree | 3 |
| Hold-In Power Consumption In W | 5.4-5.4 W 20 °C |
| Insulation Resistance | > 10 MOhm signalling circuit |
| Rated Breaking Capacity | 250 A 440 V power circuit IEC 60947 |
| Irms Rated Making Capacity | 250 A 440 V power circuit IEC 60947 || 140 A AC signalling circuit IEC 60947-5-1 || 250 A DC signalling circuit IEC 60947-5-1 |
| Associated Fuse Rating | 10 A gG signalling circuit IEC 60947-5-1 || 25 A gG <= 690 V type 1 power circuit || 20 A gG <= 690 V type 2 power circuit |
| [Uimp] Rated Impulse Withstand Voltage | 6 kV IEC 60947 |
| Pole Contact Composition | 2 NO + 2 NC |
| Minimum Switching Current | 5 mA signalling circuit |
| Connections - Terminals | power circuit screw clamp terminals 1 1-4 mm² flexible without cable end || power circuit screw clamp terminals 2 1-4 mm² flexible without cable end || power circuit screw clamp terminals 1 1-4 mm² flexible with cable end || power circuit screw clamp terminals 2 1-2.5 mm² flexible with cable end || power circuit screw clamp terminals 1 1-4 mm² solid without cable end || power circuit screw clamp terminals 2 1-4 mm² solid without cable end || control circuit screw clamp terminals 1 1-4 mm² flexible without cable end || control circuit screw clamp terminals 2 1-4 mm² flexible without cable end || control circuit screw clamp terminals 1 1-4 mm² flexible with cable end || control circuit screw clamp terminals 2 1-2.5 mm² flexible with cable end || control circuit screw clamp terminals 1 1-4 mm² solid without cable end || control circuit screw clamp terminals 2 1-4 mm² solid without cable end |
| Coil Technology | built-in bidirectional peak limiting diode suppressor |
| Time Constant | 28 ms |
| Operating Time | 53.55...72.45 ms closing || 16...24 ms opening |
| Minimum Switching Voltage | 17 V signalling circuit |
| Maximum Operating Rate | 3600 cyc/h 60 °C |
| Signalling Circuit Frequency | 25...400 Hz |
| Tightening Torque | power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals pozidriv No 2 || power circuit 1.7 N.m screw clamp terminals pozidriv No 2 |
| Electrical Durability | 0.3 Mcycles 20 A AC-1 <= 690 V |
| Inrush Power In W | 5.4-5.4 W 20 °C) |
| Power Dissipation Per Pole | 1.56 W AC-1 |
| Mechanical Durability | 30 Mcycles |
| Auxiliary Contacts Type | mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1 |
| Compatibility Code | LC1D |
| Overvoltage Category | III |
| [Ui] Rated Insulation Voltage | power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1 || signalling circuit 600 V CSA || signalling circuit 600 V UL |
| [Icw] Rated Short-Time Withstand Current | 105 A 40 °C - 10 s power circuit || 210 A 40 °C - 1 s power circuit || 30 A 40 °C - 10 min power circuit || 61 A 40 °C - 1 min power circuit || 100 A - 1 s signalling circuit || 120 A - 500 ms signalling circuit || 140 A - 100 ms signalling circuit |
| Protective Cover | with |
| Average Impedance | 2.5 mOhm - Ith 25 A 50 Hz power circuit |
| Auxiliary Contact Composition | 1 NO + 1 NC |
| [Ith] Conventional Free Air Thermal Current | 20 A 60 °C power circuit || 10 A 60 °C signalling circuit |
| Control Circuit Voltage Limits | 0.1...0.25 Uc -40-60 °C drop-out DC || 0.7...1.25 Uc -40-60 °C operational DC || 1...1.25 Uc 60-70 °C operational DC |
| Mounting Support | plate || rail |
| Contact Compatibility | M7 |
Offer Sustainability | |
| Rohs Exemption Information | Yes |
| Eu Rohs Directive | Compliant |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP110230EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
| China Rohs Regulation | Product out of China RoHS scope. Substance declaration for your information. |
| Circularity Profile | ENVEOLI1102030EN |
Environment | |
| Product Certifications | UL || CCC || CSA || UKCA || EAC || CB || EU-RO-MR by DNV-GL |
| Operating Altitude | 0...9842.52 ft (0...3000 m) |
| Fire Resistance | 850 °C IEC 60695-2-1 |
| Width | 45 mm |
| Depth | 99 mm |
| Permissible Ambient Air Temperature Around The Device | -40-60 °C || 60-70 °C with derating |
| Height | 85 mm |
| Standards | CSA C22.2 No 60947-4-1 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 60947-5-1 || UL 60947-4-1 || CSA C22.2 No 60947-5-1 || GB/T 14048.4 |
| Climatic Withstand | IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat |
| Net Weight | 0.525 kg |
| Flame Retardance | V1 conforming to UL 94 |
| Protective Treatment | THIEC 60068-2-30 |
| Ip Degree Of Protection | IP20 front face IEC 60529 |
| Mechanical Robustness | vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor open 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms) |
