I/O module - AXL F DO16 FLK 1H - 2701813
- Produttore:
- PHOENIX CONTACT
Axioline F, Digital output module, Digital outputs: 16, 24 V DC, 500 mA, connection method: FLK connector (20-pos.), transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector
Features
16 digital outputs
24 V DC, 500 mA
1 FLK connection, 20-pos.
Minimum update time of < 100 μs
Device rating plate stored
Diagnostic and status indicators
BV
BSH
cULus Listed
LR
RINA
PRS
NK
DNV GL
KR
ABS
UL Listed
cUL Listed
Specifications
Depth | 54 mm |
---|---|
Height | 126.1 mm |
Output Voltage | 24 V |
Strip Length | 8 mm |
Width | 35 mm |
Electrical isolation | |
Test section | 5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min. |
Test section | 5 V supply of the local bus (UBus) / functional ground 500 V AC 50 Hz 1 min. |
Test section | 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. |
Standards and Regulations | |
Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
Mechanical tests | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse |
Mechanical tests | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Environmental Product Compliance | |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Axioline potentials | |
Designation | Axioline F local bus supply (UBus) |
Supply voltage | 5 V DC (via bus base module) |
Current consumption | max. 120 mA |
Power consumption | max. 600 mW |
Designation | Supply for digital output modules (UO) |
Supply voltage | 24 V DC |
Supply voltage range | 19.2 V DC - 30 V DC (including all tolerances, including ripple) |
Current consumption | max. 8 A (provide external protection) |
Power consumption | max. 240 W (of which 560 mW with internal losses) |
Protective circuit | Surge protection of the supply voltage electronic (35 V, 0.5 s) |
Protective circuit | Polarity reversal protection of the supply voltage parallel diode; with external 5 A fuse (only for commissioning) |
Protection | max. 8 A (polarity reversal protection up to 5 A) |
Connection data | |
Designation | Axioline F connector |
Connection method | Push-in connection |
Note on the connection method | Please observe the information provided on conductor cross sections in the 'Axioline F: system and installation' user manual. |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 1.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 1.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 16 |
Stripping length | 8 mm |
Dimensions | |
Width | 35 mm |
Height | 126.1 mm |
Depth | 54 mm |
Note on dimensions | The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). |
Interfaces | |
Designation | Axioline F local bus |
No. of channels | 2 |
Connection method | Bus base module |
Transmission speed | 100 Mbps |
Digital outputs | |
Output name | Digital outputs |
Connection method | FLK20 pin strip |
Connection technology | FLK connector (20-pos.) |
Number of outputs | 16 |
Protective circuit | Short-circuit protection, overload protection of the outputs Electronic |
Output voltage | 24 V |
Nominal output voltage | 24 V DC |
Maximum output current per channel | 500 mA |
Maximum output current per module | 8 A (provide external protection) |
Nominal load, inductive | max. 12 VA (1.2 H, 48 Ω, with nominal voltage) |
Nominal load, lamp | max. 12 W (at nominal voltage) |
Nominal load, ohmic | max. 12 W (48 Ω, with nominal voltage) |
Switching frequency | max. 10000 per second (with at least 50 mA load current) |
Load min. | 10 kΩ |
Output voltage when switched off | max. 1 V |
Output current when switched off | max. 300 µA |
Behavior with overload | Shutdown with automatic restart |
Behavior with inductive overload | Output can be destroyed |
Reverse voltage resistance to short pulses | limited protection up to 0.5 A for 1 s |
Ambient conditions | |
Permissible humidity (storage/transport) | 5 % - 95 % (non-condensing) |
Air pressure (operation) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa - 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP20 |
Ambient temperature (operation) | -25 °C - 60 °C |
Ambient temperature (storage/transport) | -40 °C - 85 °C |
Permissible humidity (operation) | 5 % - 95 % (non-condensing) |
Note | |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |