Signal conditioner - MINI MCR-SL-U-I-0 - 2813512
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 215.68
- Codice Nuova Elva
- 2813512
- Codice produttore
- 2813512
- Disponibilità
- Invia RdO
MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0 V ... 10 V, output signal: 0 mA ... 20 mA
Features
Power supply possible via the foot element (TBUS)
Low power consumption
Entry-level alternative to configurable signal conditioners
Highly-compact isolating amplifier for electrical isolation, conversion, amplification, and filtering of standard analog signals
3-way isolation
Fixed signal combinations
cULus Listed
cULus Recognized
ATEX
EAC Ex
DNV GL
UL Listed
cUL Listed
UL Recognized
cUL Recognized
Specifications
| Depth | 101.2 mm |
|---|---|
| Height | 93.1 mm |
| Strip Length | 12 mm |
| Width | 6.2 mm |
Ambient conditions | |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Ambient temperature (operation) | -20 °C - 65 °C |
| Ambient temperature (storage/transport) | -40 °C - 85 °C |
| Maximum altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % - 95 % (non-condensing) |
| Degree of protection | IP20 |
Environmental Product Compliance | |
| REACh SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Power supply | |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC - 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Max. current consumption | < 28 mA |
| Power consumption | < 600 mW |
Dimensions | |
| Width | 6.2 mm |
| Height | 93.1 mm |
| Depth | 101.2 mm |
Input data | |
| Number of inputs | 1 |
| Configurable/programmable | no |
| Voltage input signal | 0 V - 10 V |
| max. input voltage | 30 V |
| Input resistance of voltage input | approx. 100 kΩ |
Output data | |
| Number of outputs | 1 |
| Configurable/programmable | no |
| Current output signal | 0 mA - 20 mA |
| Max. output current | 28 mA |
| Load/output load current output | ≤ 500 Ω |
| Ripple | < 20 mVPP (at 500 Ω) |
Connection data | |
| Connection method | Screw connection |
| Stripping length | 12 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² - 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² - 2.5 mm² |
| Conductor cross section AWG | 26 - 12 |
Standards and Regulations | |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
| Connection in acc. with standard | CUL |
| Standards/regulations | EN 61000-4-2 |
| Designation | Electromagnetic RF field |
| Standards/regulations | EN 61000-4-3 |
| Standards/regulations | EN 61000-4-4 |
| Standards/regulations | EN 61000-4-5 |
| Designation | Conducted interferences |
| Standards/regulations | EN 61000-4-6 |
| Electrical isolation | Basic insulation according to EN 61010 |
| Conformance | CE-compliant |
| ATEX | II 3 G Ex nA IIC T4 Gc X |
| UL, USA/Canada | UL 508 Recognized |
| UL, USA/Canada | Class I, Div. 2, Groups A, B, C, D T4 |
| GL | GL EMC 2 D |
EMC data | |
| Designation | Electromagnetic RF field |
| Standards/regulations | EN 61000-4-3 |
| Typical deviation from the measuring range final value | 5 % |
| Designation | Fast transients (burst) |
| Standards/regulations | EN 61000-4-4 |
| Designation | Conducted interferences |
| Standards/regulations | EN 61000-4-6 |
Note | |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
