Relay Module - RIF-2-RPT-LDP-24DC/4X21 - 2903308
- Produttore:
- PHOENIX CONTACT
- Prezzo (IVA esclusa)
- € 15.34
- Codice Nuova Elva
- 2903308
- Codice produttore
- 2903308
- Disponibilità
- 5 in stock
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 PDTs. Input voltage: 24 V DC
Features
EAC
LR
PRS
DNV GL
CSA
Specifications
| Depth | 75 mm |
|---|---|
| Height | 96 mm |
| Strip Length | 8 mm |
| Width | 31 mm |
Environmental Product Compliance | |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Connection data | |
| Connection name | Coil side |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² - 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 1.5 mm² (Ferrule with plastic sleeve) |
| Conductor cross section flexible | 0.14 mm² - 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) |
| Conductor cross section AWG | 26 - 16 (solid) |
| Conductor cross section AWG | 26 - 16 (flexible) |
Connection data 2 | |
| Connection name | Contact side |
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² - 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² - 1.5 mm² (Ferrule with plastic sleeve) |
| Conductor cross section flexible | 0.14 mm² - 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block) |
| Conductor cross section AWG | 26 - 16 (solid) |
| Conductor cross section AWG | 26 - 16 (flexible) |
Dimensions | |
| Width | 31 mm |
| Height | 96 mm |
| Depth | 75 mm |
Coil side | |
| Input voltage range in reference to UN | see diagram |
| Typical input current at UN | 42 mA |
| Typical response time | 13 ms |
| Typical release time | 14 ms |
| Coil voltage | 24 V DC |
| Protective circuit | Damping diode |
| Operating voltage display | Yellow LED |
| Power dissipation for nominal condition | 1.01 W |
| Nominal input voltage UN | 24 V DC |
Contact side | |
| Contact type | 4 PDTs |
| Type of switch contact | Single contact |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (At 24 mA) |
| Min. switching current | 5 mA (at 24 V) |
| Maximum inrush current | 16 A (20 ms, N/O contacts) |
| Limiting continuous current | 6 A (see diagram) |
| Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 124 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 108 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 52 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 48 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
| Switching capacity | 2 A (at 24 V, DC13) |
| Switching capacity | 0.22 A (at 120 V, DC13) |
| Switching capacity | 0.11 A (at 250 V, DC13) |
| Switching capacity | 1.5 A (at 24 V, AC15) |
| Switching capacity | 1.5 A (at 120 V, AC15) |
| Switching capacity | 1 A (at 240 V, AC15) |
Standards and Regulations | |
| Connection in acc. with standard | CSA |
| Standards/regulations | DIN EN 50178 |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage | 2.5 kV |
| Insulation | Basic insulation |
| Pollution degree | 2 |
| Overvoltage category | II |
Ambient conditions | |
| Ambient temperature (operation) | -40 °C - 60 °C |
| Ambient temperature (storage/transport) | -40 °C - 85 °C |
| Degree of protection | IP20 (Relay base) |
| Degree of protection | RT I (Relay) |
Note | |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
