Relay Module - PLC-RSC- 24DC/ 1AU/SEN - 2966317
- Produttore:
- PHOENIX CONTACT
PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC
Features
Time savings of up to 60 %
Efficient connection to system cabling using V8 adapter
No need for additional modular terminal blocks
Relay modules with safe isolation according to DIN EN 50178 between coil and contact
Space savings of up to 80 %
Functional plug-in bridges
Sensor connected directly to relay module
cULus Listed
RC FRT
cULus Recognized
EAC
PRS
DNV GL
UL Listed
cUL Listed
UL Recognized
cUL Recognized
Specifications
Depth | 94 mm |
---|---|
Height | 80 mm |
Strip Length | 8 mm |
Width | 6.2 mm |
Contact side (with destroyed gold layer) | |
Note | the following values are applicable if a gold layer is destroyed |
Maximum switching voltage | 250 V AC/DC |
Minimum switching voltage | 5 V (at 100 mA) |
Limiting continuous current | 6 A |
Min. switching current | 10 mA (at 12 V) |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 20 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 18 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 23 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 40 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
Switching capacity | 2 A (at 24 V, DC13) |
Switching capacity | 0.2 A (at 110 V, DC13) |
Switching capacity | 0.1 A (at 220 V, DC13) |
Switching capacity | 3 A (at 24 V, AC15) |
Switching capacity | 3 A (at 120 V, AC15) |
Switching capacity | 3 A (at 230 V, AC15) |
Environmental Product Compliance | |
REACh SVHC | Lead 7439-92-1 |
China RoHS | Environmentally Friendly Use Period = 50 years |
China RoHS | For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration' |
Dimensions | |
Width | 6.2 mm |
Height | 80 mm |
Depth | 94 mm |
Connection data | |
Connection name | Coil side |
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.2 mm² - 2.5 mm² (Single ferrule) |
Conductor cross section flexible | 2x 0.5 mm² - 1.5 mm² (TWIN ferrule) |
Conductor cross section AWG | 26 - 14 |
Connection data 2 | |
Connection name | Contact side |
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.14 mm² - 2.5 mm² |
Conductor cross section flexible | 0.2 mm² - 2.5 mm² (Single ferrule) |
Conductor cross section flexible | 2x 0.5 mm² - 1.5 mm² (TWIN ferrule) |
Conductor cross section AWG | 26 - 14 |
Coil side | |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Reverse polarity protection Polarity protection diode |
Protective circuit | Free-wheeling diode Damping diode |
Operating voltage display | Yellow LED |
Power dissipation for nominal condition | 0.22 W |
Nominal input voltage UN | 24 V DC |
Typical input current at UN | 9 mA |
Contact side | |
Contact type | 1 N/O contact |
Type of switch contact | Single contact |
Contact material | AgSnO, hard gold-plated |
Maximum switching voltage | 30 V AC |
Maximum switching voltage | 36 V DC |
Minimum switching voltage | 100 mV (at 10 mA) |
Min. switching current | 1 mA (at 24 V) |
Maximum inrush current | 50 mA |
Limiting continuous current | 50 mA |
Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
Standards and Regulations | |
Connection in acc. with standard | CUL |
Designation | Standards/regulations |
Standards/regulations | IEC 60664 |
Standards/regulations | EN 50178 |
Pollution degree | 3 |
Overvoltage category | III |
Ambient conditions | |
Ambient temperature (operation) | -40 °C - 60 °C |
Ambient temperature (storage/transport) | -40 °C - 85 °C |
Degree of protection | IP20 (Relay base) |
Note | |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |