SM323, 16DI/DO, DC24V, 0,5A
- Produttore:
- SIEMENS
- Prezzo (IVA esclusa)
- € 685.80
- Codice Nuova Elva
- 6ES73231BL000AA0
- Codice produttore
- 6ES7323-1BL00-0AA0
- Disponibilità
- Invia RdO
SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN
Specifications
Depth | 120 mm |
---|---|
Height | 125 mm |
Voltage | 28.8 V |
Width | 40 mm |
Specifications | |
Connector type on the front required | 40-pin |
Design of the sensor connectable 2-wire transmitter | yes |
Digital input version Type 1 acc. to IEC 61131 | yes |
Digital input/output version configurable | yes |
Display version for diagnostic function: status display digital input LED green | yes |
Display version for diagnostic function: status display digital output LED green | yes |
Equipment marking acc. to DIN EN 81346-2 | K |
Explosion protection category for gas | FM, UL Haz. Loc. for Div. 2 / Zone 2, ATEX for Zone 2 |
Explosion protection marking for intrinsic safety of related equipment EEx ia | no |
Explosion protection marking for intrinsic safety of related equipment EEx ib | no |
Galvanic isolation at the digital inputs between the channels | yes |
Consumed current from backplane bus at DC at 5 V maximum [mA] | 80 |
Galvanic isolation at the digital inputs between the channels and backing bus | yes |
Galvanic isolation at the digital inputs between the channels and backing bus Note | Optocoupler |
Galvanic isolation at the digital outputs between the channels | yes |
Galvanic isolation at the digital outputs between the channels and backing bus | yes |
Galvanic isolation at the digital outputs between the channels and backing bus Note | Optocoupler |
Height [mm] | 125 |
Input current at digital input for signal <1> [A] | 0.007 |
Input current at digital input for signal <1> typical [mA] | 7 |
Input delay time at the standard inputs for signal <0> to <1> at rated input voltage maximum [ms] | 4.8 |
Input delay time at the standard inputs for signal <0> to <1> at rated input voltage minimum [µs] | 1200 |
Consumed current from load voltage L+ without load maximum [mA] | 80 |
Input delay time at the standard inputs for signal <1> to <0> at rated input voltage maximum [µs] | 4800 |
Input delay time at the standard inputs for signal <1> to <0> at rated input voltage minimum [µs] | 1200 |
Input voltage at digital input at DC rated value [V] | 24 |
Input voltage at digital input at DC Rated value [V] | 24 |
Load resistance at digital output maximum [Ohm] | 4000 |
Load resistance at digital output minimum [Ohm] | 48 |
Load voltage from supply voltage L+ at DC Rated value [V] | 24 |
Load voltage from supply voltage L+ at DC rated value maximum [V] | 28.8 |
Load voltage from supply voltage L+ at DC rated value minimum [V] | 20.4 |
Minimum load current at digital output for signal <1> [mA] | 5 |
Delay time at signal change at digital output with resistive load for signal <0> to <1> maximum [µs] | 100 |
Number of channels at digital input per potential group | 16 |
Number of channels at digital output per potential group | 8 |
Number of digital inputs | 16 |
Number of digital outputs | 16 |
Number of simultaneously controllable digital inputs in horizontal mounting position up to 40 °C maximum | 16 |
Number of simultaneously controllable digital inputs in horizontal mounting position up to 60 °C maximum | 8 |
Number of simultaneously controllable digital inputs in vertical mounting position up to 40 °C maximum | 16 |
Operating voltage as input voltage maximum permissible [V] | 30 |
Operating voltage as input voltage minimum permissible [V] | -30 |
Operating voltage as output voltage maximum permissible [V] | 28.8 |
Delay time at signal change at digital output with resistive load for signal <1> to <0> maximum [µs] | 500 |
Operating voltage as output voltage minimum permissible [V] | 0 |
Output current at digital output for signal <1> maximum [A] | 0.6 |
Output current at digital output for signal <1> minimum [mA] | 5 |
Output current at digital output for signal <1> Rated value [mA] | 500 |
Power loss [W] typical [mW] | 6500 |
product brand name | SIMATIC |
Product category | Digital module input/output |
Product family | S7-300 |
Product feature redundancy capability | yes |
Product function Alarms | no |
Delay time at signal change maximum [ns] | 4800000 |
Product function at digital output control of a digital input | yes |
Product function at digital output parallel switching of outputs for increasing the power | no |
Product function at the digital outputs Short circuit protection | yes |
Product function Diagnostics function | no |
Quiescent current of the 2-wire transducer maximum permissible [mA] | 1.5 |
Residual current at digital output with signal <0> maximum [µA] | 500 |
Suitability for use safety-related function | no |
Supply voltage at DC rated value maximum [V] | 28.8 |
Supply voltage at DC rated value minimum [V] | 20.4 |
Switching capacity active power at digital output with filament lamp load maximum [W] | 5 |
Delay time at signal change minimum [s] | 0.0012 |
Switching frequency at digital output with filament lamp load maximum [Hz] | 100 |
Switching frequency at digital output with inductive load maximum [Hz] | 0.5 |
Switching frequency at digital output with resistive load maximum [Hz] | 100 |
Total current of digital outputs in horizontal mounting position up to 40 °C per group maximum [mA] | 4000 |
Total current of digital outputs in horizontal mounting position up to 60 °C per group maximum [mA] | 3000 |
Total current of digital outputs in vertical mounting position up to 40 °C per group maximum [mA] | 2000 |
Type of electrical connection | Screw/spring-type terminal |
Type of isolation test | 500 V DC |
Type of voltage at digital input | DC |
Type of voltage at digital output | DC |
Depth [mm] | 120 |
Type of voltage of the input voltage | DC |
Type of voltage of the output voltage | DC |
Type of voltage of the supply voltage | DC |
Value range of the input voltage at digital input for signal <0> detection | -30 to +5V |
Value range of the input voltage at digital input for signal <1> detection | 13 to 30V |
Value range of the output voltage at digital output for signal <1> at DC | L+ (-0.8 V) |
Voltage limitation method of inductive trip voltage | L+ (-48 V) |
Width [mm] | 40 |
Wire length at digital input shielded maximum [m] | 1000 |
Wire length at digital input unshielded maximum [mm] | 600000 |
Design of the digital output | transistor |
Wire length at digital output shielded maximum [m] | 1000 |
Wire length at digital output unshielded maximum [m] | 600 |
Delivery Information | |
Export Control Regulations | AL : N / ECCN : N |
Delivery Time | 1 Day/Days |
Net Weight (lb) | 0,672 lb |
Product Dimensions (W x L x H) | Not available |
Packaging Dimension | 5,157 x 5,906 x 2,008 |
Package size unit of measure | in |
Quantity Unit | 1 Piece |
Packaging Quantity | 1 |
Additional Product Information | |
EAN | 4025515061120 |
UPC | 662643117950 |
Commodity Code | 85389091 |
LKZ_FDB/ CatalogID | ST73 |
Product Group | 4031 |
Country of origin | Germany |
RoHS Compliance | Since: 03/31/2008 |
Returnable | Yes |
Obligation Category for taking back electrical and electronic equipment after use | No obligation to take back electrical and electronic equipment after use |