SM323, 16DI/DO, DC24V, 0,5A
- Produttore:
- SIEMENS
- Prezzo (IVA esclusa)
- € 685.80
- Codice Nuova Elva
- 6ES73231BL000AA0
- Codice produttore
- 6ES7323-1BL00-0AA0
- Disponibilità
- 3 in stock
SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN
Specifications
| Depth | 120 mm |
|---|---|
| Height | 125 mm |
| Voltage | 28.8 V |
| Width | 40 mm |
Specifications | |
| Connector type on the front required | 40-pin |
| Design of the sensor connectable 2-wire transmitter | yes |
| Digital input version Type 1 acc. to IEC 61131 | yes |
| Digital input/output version configurable | yes |
| Display version for diagnostic function: status display digital input LED green | yes |
| Display version for diagnostic function: status display digital output LED green | yes |
| Equipment marking acc. to DIN EN 81346-2 | K |
| Explosion protection category for gas | FM, UL Haz. Loc. for Div. 2 / Zone 2, ATEX for Zone 2 |
| Explosion protection marking for intrinsic safety of related equipment EEx ia | no |
| Explosion protection marking for intrinsic safety of related equipment EEx ib | no |
| Galvanic isolation at the digital inputs between the channels | yes |
| Consumed current from backplane bus at DC at 5 V maximum [mA] | 80 |
| Galvanic isolation at the digital inputs between the channels and backing bus | yes |
| Galvanic isolation at the digital inputs between the channels and backing bus Note | Optocoupler |
| Galvanic isolation at the digital outputs between the channels | yes |
| Galvanic isolation at the digital outputs between the channels and backing bus | yes |
| Galvanic isolation at the digital outputs between the channels and backing bus Note | Optocoupler |
| Height [mm] | 125 |
| Input current at digital input for signal <1> [A] | 0.007 |
| Input current at digital input for signal <1> typical [mA] | 7 |
| Input delay time at the standard inputs for signal <0> to <1> at rated input voltage maximum [ms] | 4.8 |
| Input delay time at the standard inputs for signal <0> to <1> at rated input voltage minimum [µs] | 1200 |
| Consumed current from load voltage L+ without load maximum [mA] | 80 |
| Input delay time at the standard inputs for signal <1> to <0> at rated input voltage maximum [µs] | 4800 |
| Input delay time at the standard inputs for signal <1> to <0> at rated input voltage minimum [µs] | 1200 |
| Input voltage at digital input at DC rated value [V] | 24 |
| Input voltage at digital input at DC Rated value [V] | 24 |
| Load resistance at digital output maximum [Ohm] | 4000 |
| Load resistance at digital output minimum [Ohm] | 48 |
| Load voltage from supply voltage L+ at DC Rated value [V] | 24 |
| Load voltage from supply voltage L+ at DC rated value maximum [V] | 28.8 |
| Load voltage from supply voltage L+ at DC rated value minimum [V] | 20.4 |
| Minimum load current at digital output for signal <1> [mA] | 5 |
| Delay time at signal change at digital output with resistive load for signal <0> to <1> maximum [µs] | 100 |
| Number of channels at digital input per potential group | 16 |
| Number of channels at digital output per potential group | 8 |
| Number of digital inputs | 16 |
| Number of digital outputs | 16 |
| Number of simultaneously controllable digital inputs in horizontal mounting position up to 40 °C maximum | 16 |
| Number of simultaneously controllable digital inputs in horizontal mounting position up to 60 °C maximum | 8 |
| Number of simultaneously controllable digital inputs in vertical mounting position up to 40 °C maximum | 16 |
| Operating voltage as input voltage maximum permissible [V] | 30 |
| Operating voltage as input voltage minimum permissible [V] | -30 |
| Operating voltage as output voltage maximum permissible [V] | 28.8 |
| Delay time at signal change at digital output with resistive load for signal <1> to <0> maximum [µs] | 500 |
| Operating voltage as output voltage minimum permissible [V] | 0 |
| Output current at digital output for signal <1> maximum [A] | 0.6 |
| Output current at digital output for signal <1> minimum [mA] | 5 |
| Output current at digital output for signal <1> Rated value [mA] | 500 |
| Power loss [W] typical [mW] | 6500 |
| product brand name | SIMATIC |
| Product category | Digital module input/output |
| Product family | S7-300 |
| Product feature redundancy capability | yes |
| Product function Alarms | no |
| Delay time at signal change maximum [ns] | 4800000 |
| Product function at digital output control of a digital input | yes |
| Product function at digital output parallel switching of outputs for increasing the power | no |
| Product function at the digital outputs Short circuit protection | yes |
| Product function Diagnostics function | no |
| Quiescent current of the 2-wire transducer maximum permissible [mA] | 1.5 |
| Residual current at digital output with signal <0> maximum [µA] | 500 |
| Suitability for use safety-related function | no |
| Supply voltage at DC rated value maximum [V] | 28.8 |
| Supply voltage at DC rated value minimum [V] | 20.4 |
| Switching capacity active power at digital output with filament lamp load maximum [W] | 5 |
| Delay time at signal change minimum [s] | 0.0012 |
| Switching frequency at digital output with filament lamp load maximum [Hz] | 100 |
| Switching frequency at digital output with inductive load maximum [Hz] | 0.5 |
| Switching frequency at digital output with resistive load maximum [Hz] | 100 |
| Total current of digital outputs in horizontal mounting position up to 40 °C per group maximum [mA] | 4000 |
| Total current of digital outputs in horizontal mounting position up to 60 °C per group maximum [mA] | 3000 |
| Total current of digital outputs in vertical mounting position up to 40 °C per group maximum [mA] | 2000 |
| Type of electrical connection | Screw/spring-type terminal |
| Type of isolation test | 500 V DC |
| Type of voltage at digital input | DC |
| Type of voltage at digital output | DC |
| Depth [mm] | 120 |
| Type of voltage of the input voltage | DC |
| Type of voltage of the output voltage | DC |
| Type of voltage of the supply voltage | DC |
| Value range of the input voltage at digital input for signal <0> detection | -30 to +5V |
| Value range of the input voltage at digital input for signal <1> detection | 13 to 30V |
| Value range of the output voltage at digital output for signal <1> at DC | L+ (-0.8 V) |
| Voltage limitation method of inductive trip voltage | L+ (-48 V) |
| Width [mm] | 40 |
| Wire length at digital input shielded maximum [m] | 1000 |
| Wire length at digital input unshielded maximum [mm] | 600000 |
| Design of the digital output | transistor |
| Wire length at digital output shielded maximum [m] | 1000 |
| Wire length at digital output unshielded maximum [m] | 600 |
Delivery Information | |
| Export Control Regulations | AL : N / ECCN : N |
| Delivery Time | 1 Day/Days |
| Net Weight (lb) | 0,672 lb |
| Product Dimensions (W x L x H) | Not available |
| Packaging Dimension | 5,157 x 5,906 x 2,008 |
| Package size unit of measure | in |
| Quantity Unit | 1 Piece |
| Packaging Quantity | 1 |
Additional Product Information | |
| EAN | 4025515061120 |
| UPC | 662643117950 |
| Commodity Code | 85389091 |
| LKZ_FDB/ CatalogID | ST73 |
| Product Group | 4031 |
| Country of origin | Germany |
| RoHS Compliance | Since: 03/31/2008 |
| Returnable | Yes |
| Obligation Category for taking back electrical and electronic equipment after use | No obligation to take back electrical and electronic equipment after use |
